







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Westchester, FL
Iron fencing in Westchester, FL typically runs $2,800 to $7,500 for a standard residential run, with most homeowners landing between $3,400 and $5,200 for 100 to 150 linear feet of painted or powder-coated steel. Wrought iron and ornamental steel are the two terms you’ll hear used interchangeably, and both give you something chain link and vinyl can’t: a barrier that looks intentional from the street and holds up against the salt air, afternoon thunderstorms, and occasional tropical systems that move through Miami-Dade County every summer. We install iron fencing for homeowners who want a real property line, not a decorative suggestion.
Groundwork Construction Co. of Westchester does this work as part of our broader Fence Installation line, which means you’re getting one contractor who handles layout, permitting coordination, footing, fabrication specs, and final walkthrough under the 730-Day Done Right Promise. If it’s not done right, we make it right. That guarantee covers the workmanship behind every post, weld, and gate hinge we install.
Have a measurement in mind or a property line that’s giving you trouble? Call (833) 630-4214 and a live person will pick up, any hour of any day. No voicemail, no waiting until Monday. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform.
Key Takeaways
- Iron fencing in Westchester, FL runs roughly $2,800 to $7,500 for a typical residential installation, priced by linear foot plus gates and finish.
- Powder-coated steel holds up better than bare iron in South Florida’s humidity and salt-laden air.
- Footings matter most here. Westchester’s limestone-influenced soil and high water table change how deep we set posts compared to inland markets.
- Every job is backed by the 730-Day Done Right Promise, and estimates are free.

When You Need Iron Fence
Not every property calls for iron. When it does, the reasons are usually specific:
- You want a barrier that reads as permanent. Iron tells a visitor they’ve reached a boundary. Homeowners near the Westchester Country Club and the older streets off Coral Way choose it for exactly that reason.
- Your current fence has started to fail. Wood rots fast in our humidity, and we routinely see gate posts leaning after a summer of heavy rain. In neighborhoods like Tamiami and Fontainebleau, wooden fences often don’t survive a decade without serious repair.
- You’re adding a pool and need a code-compliant barrier. Florida pool safety rules are strict about barrier height, gate self-closing hardware, and latches out of a child’s reach. Iron meets those requirements while looking better than a standard aluminum picket.
- You’re defining a corner lot or commercial frontage. The stretch of SW 8th Street and the busier corridors through Westchester see a lot of iron fencing on mixed-use properties because it holds sightlines and discourages climbing.
- Your HOA wants a specific look. Several gated communities in the 33165 and 33175 ZIP codes specify ornamental iron or steel in their architectural guidelines, and we build to those specs.
- You want a fence that outlasts the mortgage. A properly installed and coated iron fence is a long-horizon investment. It costs more upfront than wood and, in most cases, needs less attention over time.
Our Iron Fence Process
Every iron fence we install follows the same steps, from first call to final walkthrough:
- On-site measurement and layout. We walk the property line with you, confirm where the fence should sit relative to your survey, and note gates, slopes, and any obstructions. If you don’t have a recent survey, we’ll tell you plainly what we need before we dig.
- Upfront pricing and material selection. You get a written number before any work starts: the number you see is the number you pay. We walk you through finish options, panel styles, post spacing, and gate hardware. If your budget has room, we’ll also point you toward paver and hardscape partners like Tremron or Techo-Bloc so the fence ties into a driveway or walkway that matches.
- Permitting and HOA coordination. Iron fencing over a certain height typically requires a Miami-Dade County permit, and setback rules vary by lot. We handle the paperwork and pull the approvals so you’re not chasing clerk offices.
- Footing and post setting. This is where most iron fences in Westchester succeed or fail. We set posts in concrete footings sized for the local soil and our high water table, then let them cure before panels go up. Rushing this step is the single most common cause of leaning gates we’re called out to repair.
- Panel, gate, and finish installation. We set panels to consistent spacing and swing, mount gates with self-closing hinges where required, and touch up the powder coat at weld points and hardware connections. Most residential jobs are completed in a single visit once footings have cured.
- Final walkthrough and documentation. We walk the entire run with you, demonstrate the gates, confirm hardware, and hand over the details of your 730-Day Done Right Promise. If something looks off after we leave, we come back and make it right.

Iron Fence Pricing in Westchester
Iron fence pricing is driven by height, gauge, finish, and how much gate work you need. Here’s what Westchester homeowners typically see:
| Line Item | Typical Range | What Drives the Number |
|---|---|---|
| Standard ornamental steel, 4 ft | $24 – $38 per linear ft | Gauge, panel spacing, finish |
| Heavier wrought iron, 4-5 ft | $35 – $55 per linear ft | Solid bar stock, hand-forged details |
| Pool barrier (code-compliant) | $30 – $50 per linear ft | Height, gate hardware, self-closing hinges |
| Single walk gate (installed) | $450 – $950 | Width, hardware, automation |
| Driveway gate (manual) | $1,500 – $3,200 | Span, weight, frame reinforcement |
| Driveway gate (automated) | $3,500 – $7,500 | Motor, keypad, safety sensors |
| Permit coordination | $150 – $450 | Run length, structural requirements |
| Removal of existing fence | $250 – $600 | Material, condition, access |
Three things push costs higher in Westchester specifically. First, our high water table means we sometimes need deeper or wider footings than a contractor from a drier market would budget for. Second, salt air and humidity require a powder-coated or galvanized finish to prevent rust. Bare iron rusts fast here, and a fence that looks fine after year one can look like a problem after year three. Third, gate work adds weight and hardware that a straight run doesn’t require.
Whatever the number, you get it upfront before work begins. We also offer 0% financing for 18 months, and $1,000 off projects over $10,000. The free estimate and design consult includes a walkthrough with a number in writing.
For homeowners comparing material options, a short comparison of iron against chain link and wood is helpful. Iron runs $24 to $55 per linear foot depending on style; chain link typically runs $12 to $22 per foot and wood $18 to $30. Iron usually costs the most and lasts the longest. In a market where wood fences often don’t survive a decade without repair, that math tends to work out.
FAQs – Iron Fence
How much does an iron fence cost in Westchester, FL?
An iron fence in Westchester, FL typically costs $2,800 to $7,500, with most residential installations landing around $3,400 to $5,200 for 100 to 150 linear feet, and gates and automated hardware adding more. Call (833) 630-4214 for an exact quote. Estimates are free, pricing is upfront, and financing at 0% for 18 months is available.
Can you come out today?
We can often schedule a free estimate on short notice, and calls are answered by a live person 24 hours a day, 7 days a week. Iron fence installation itself usually takes a few days from measurement to walkthrough because the footings need to cure. Call (833) 630-4214 and we’ll tell you exactly when we can be there.
Is it cheaper to repair an existing iron fence or replace it?
Repair is cheaper when the posts and main structure are sound and the issue is isolated rust or a bent gate section. Replacement makes more sense when footings have failed or rust has compromised structural pieces. We’ll tell you which one applies on the walkthrough before you commit to anything, and either way the work is covered by the 730-Day Done Right Promise. Call (833) 630-4214 to schedule.
What finish holds up best to Westchester’s humidity and salt air?
Powder-coated or galvanized iron finishes hold up best in Westchester’s climate. Local humidity and salt-laden coastal air attack bare iron fast, and a quality factory or applied finish extends the life of the fence dramatically. We’ll recommend the right finish for your property and point out spots where rust is most likely to show. Call (833) 630-4214 to talk through options.
Why Homeowners Call Us for Iron Fence Work
Fencing looks straightforward until you’re the one digging footings in saturated soil and trying to keep gate swings consistent across a 150-foot run. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform ready to work. Groundwork has been in business since 2014, and we’ve handled fencing projects across Westchester and the surrounding communities within our broader home construction and remodeling services.
We back every iron fence we install with the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. Built to last, backed in writing. The number you see on the estimate is the number you pay once work begins, and we don’t leave the site until the last gate swings right and the final walkthrough is done.
Want to talk through your project? Call (833) 630-4214 for a free estimate and design consult. A live person answers any hour of any day. For homeowners comparing fence styles, our broader Fence Installation in Westchester page walks through the full range of options we install, from wood and vinyl to aluminum and iron.
Written by the team at Groundwork Construction Co. of Westchester, serving Westchester.


