







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fountainebleau, FL: What the Job Actually Takes
Paver driveways in Fountainebleau, FL typically run $7,000 to $18,000 for a standard two-car apron, and most are finished in five to eight working days once base prep starts. The number that surprises homeowners is rarely the pavers themselves; it’s what happens under them, because 33172 sits on drained Everglades wetland where limestone rock and a fast-rising water table change the excavation plan. Call (833) 630-4214 and we’ll walk your driveway and quote it in writing, line by line.
From Rock-Breaking to Roller-Compacted Base: How We Build a Paver Driveway Here

Every paver driveway we build in Fountainebleau follows the same five stages. The order never changes, because each stage depends on the one before it being finished and inspected.
Day 1: Layout, utility locate, and demolition
We mark the exact footprint with string lines and confirm grade and drainage direction before anything gets torn out. Utility locates go in first; in a dense Kendall-area block of 33172 you’re never far from an irrigation line or a buried cable. Then the old surface comes out: aged asphalt, cracked concrete, or an existing paver field that’s heaved. On a typical 400-square-foot two-car driveway that’s one long day. You’ll approve the final footprint and slope at the end of it, so make sure you’re home or reachable.
Days 1 – 3: Excavation and rock
This is where Fountainebleau jobs separate from jobs a few miles inland. Builders working 33172 routinely hit Miami Limestone within a few feet of grade, so a driveway excavation that would be a straightforward scoop elsewhere can turn into rock-breaking, and in the wet season it can mean managing water before you can even see the bottom of the cut. We plan for both. If the cut stays clean we’re through it in a day; if we’re breaking rock, add a day and budget for it, because it’s real machine time, not padding.
Days 2 – 4: Base, compaction, and the drainage check
We build a compacted aggregate base in lifts, wetting and running a plate or roller over each one, until the finished grade has a consistent fall away from the garage and toward the street or a drain. On flat lots with standing-water history, this is the stage that decides whether the driveway drains or puddles after a summer storm. Get this wrong and no paver on earth will save the job. You’ll see it before we lay a single stone.
Days 4 – 7: Setting bed and paver installation
Bedding sand goes down screeded to depth, then the pavers go in the pattern you picked, cut tight at the edges and around any curves. We cut field edges with a wet saw so joints stay uniform. The pattern and color you choose here is the one big decision that’s fully on you, and you’ll want to lock it in before this stage, not during it.
Days 7 – 8: Edge restraint, joint sand, and final clean
Polymeric edge restraint gets pinned along every open side, then joint sand works into the gaps and we compact the field again to seat it. We clean the surface, walk the job with you, and hand over care instructions. Done right, the whole build lands in that five-to-eight-day window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your Paver Driveway
Most of the decisions on a paver driveway come down to four choices, and each one trades cost against longevity and look.
- Concrete vs. clay pavers. Concrete pavers are the standard for a driveway and the cost-efficient choice; they hold color well and can be pressed at higher strength for drive lanes. Clay pavers look richer and resist fading beautifully, but they cost more and are less forgiving of a base that moves. On a Fountainebleau lot with shallow rock and seasonal water, a properly based concrete paver is usually the smarter money.
- Paver grade and thickness. A 60mm paver is the residential driveway standard. Some manufacturers press a heavier 80mm paver for drive aprons and heavy-traffic entries; it costs more per square foot but resists rutting where a car sits parked for years. Brands like Tremron and Cambridge Pavers both make a solid 60mm line, and Tremron’s heavier profiles suit a hard-used driveway well.
- Pattern. Running bond is the cheapest because it wastes the least material. Herringbone interlocks best and resists shifting under turning tires, but it uses more cuts and more labor. On a 33172 driveway that gets driven over daily, herringbone is the pattern we’d reach for first.
- Color and finish. Standard colors run the widest and the cheapest; tumbled or textured finishes cost more but hide tire marks and hold up better under heavy sun. Solid colors show every stain; blended palettes hide them.
We carry a curated set of pavers, and Techo-Bloc and Oldcastle both give us ranges worth walking through on a driveway, not just a front walk.
What Paver Driveways Cost in Fountainebleau, FL

A paver driveway in Fountainebleau runs $7,000 to $18,000 for installation, and that’s the honest spread. Four things push a job from the low end toward the high end.
- Square footage. A small two-car apron sits near $7,000; a wider driveway with a turn-in, extra parking bay, or a longer run from the street climbs toward $18,000.
- What has to come out and how hard it fights. Demo of an old asphalt or concrete slab is one thing. Hitting Miami Limestone and managing wet-season groundwater is another, and rock-breaking and dewatering are billable time.
- Base depth and drainage. A flat lot that needs extra base and a drainage solution costs more than a sloped one that sheds naturally.
- Paver grade, pattern, and cuts. A heavier 60mm or 80mm paver, herringbone, and a lot of edge cuts move the price up; a running-bond field of standard pavers keeps it down.
Our written estimate is line-itemed: excavation, base, the paver you chose, edge restraint, joint sand, and disposal. What it won’t include, and we’ll tell you up front, is anything we find underground once we open the cut, like an old irrigation run or unexpected rock. We price that the moment we see it, before we proceed, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Fountainebleau’s Ground Does to a Paver Driveway
Fountainebleau (ZIP 33172) is a dense Kendall-area community built almost entirely on drained Everglades wetland, and that ground changes the whole job. The water table sits close to grade and rises fast in the wet season; Miami Limestone (biscayne rock) is often a few feet down. A paver driveway is only as good as its base, and a base starts with getting the water and rock right before anything is built. Miami-Dade’s post-Andrew wind code shapes structural work, and while a driveway isn’t a roof, the same strictness around lot coverage, setbacks, and stormwater drainage applies. The housing stock we work on is largely 1970s – 1990s Mediterranean-revival homes and low-rise townhome clusters, heavy on stucco-over-CBS block and barrel-tile roofs, and many of these properties have older driveways that have cracked, heaved, or settled because the base couldn’t handle the seasonal water. If your HOA in this part of Kendall has rules on paver color or finish, check before the build, and we’ll build to your selection.
Serving Fountainebleau, FL – Our Local Coverage Area
We serve Fountainebleau and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Fountainebleau

Most paver driveways here take five to eight working days, start to finish. A clean, dry-season job with no rock moves toward five; a wet-season job that hits limestone or groundwater moves toward eight. Call (833) 630-4214 and we’ll give you a realistic timeline for your specific lot.
Possibly, depending on the scope and how your lot is graded. A like-for-like surface replacement often doesn’t trigger one; a new driveway that changes grade, drainage, or lot coverage may. We check the permitting requirements for your address before we start, so you’re not guessing. Call for a free estimate and we’ll tell you what your job needs.
For a driveway, yes; the work is surface and subgrade, so pipes and structure aren’t in the way. Where a driveway ties into a wider project you may need more, and for patios or walkways you’re often part of a full Driveway & Pavers in Fountainebleau scope, and you’ll want to think about Door Installation in Fountainebleau if your garage entry is aging too. Call (833) 630-4214 and we’ll scope it.
A paver driveway in Fountainebleau typically costs $7,000 to $18,000 installed, with the range driven by size, rock, base depth, and paver choice. We give you a written, line-item quote up front so the number you see is the number you pay. Call (833) 630-4214 for an exact price on your driveway.
Every paver driveway we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. Call (833) 630-4214 to talk through the warranty on your specific project, and homeowners often pair this with Cabinets & Countertops in Fountainebleau (visit us at Cabinets & Countertops in Fountainebleau) when a remodel is on the table.
Ready to Price Your Paver Driveway in Fountainebleau?
Get a free on-site estimate for your paver driveway in Fountainebleau. Call (833) 630-4214 and a live person answers, day or night. We’ll take your address and lot details, set a time to walk the driveway, and hand you a written, line-item quote with the price held. No surprises, no pressure. If it’s part of a wider plan, we’ll scope the whole thing under one roof.
Written by the team at Groundwork Construction Co.












