







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Chain Link Fence in Sunset, FL Costs and How Fast It Goes In
A chain link fence in Sunset, FL typically runs $3,500 to $9,000 and goes up in three to five working days once the plan is set. Most of that time is digging, setting posts in concrete, and stretching the fabric tight. Call (833) 630-4214 for a free on-site estimate and you’ll get a written, line-item number before any crew shows up.
How We Put Up a Chain Link Fence in Sunset, Step by Step

We run this job in five stages, and you’ll know what happens on each one before the first post goes in the ground.
1. Walk the line and call in locates (day 1)
We meet you on the property, walk the exact fence line, and flag where it’s going. Before anyone digs, the state one-call service locates buried utilities. You decide two things here: where the gates land, and how high the fence runs. If a sprinkler line or a low-voltage wire is in the way, we find it now, not after a post hits it. We also confirm setbacks so the county agrees with where the fence sits.
2. Set the budget and pull the county permit (days 1 – 2)
You pick the fabric gauge, the height, and the post style from a written quote. Once you sign off, we handle the Miami-Dade County permit when one is required. This isn’t the same as a city hall process; Sunset answers to the county building department, and we know what they want to see. That back-and-forth adds a few days, and we build it into the schedule instead of pretending it isn’t there.
3. Layout and post setting (days 2 – 3)
We mark terminals, corners, and gate posts to the exact spacing, then auger each hole to the depth the wind-load needs. Posts get set in concrete and cure for a full day. Getting the posts plumb and the spacing right is the whole game. Skip it and the chain sag or the gates drag. You don’t have to decide anything at this stage; it’s on us to get the geometry right.
4. Rails, fabric, and tension (day 4)
Top rails and tension bars go on, then the chain link fabric rolls out and gets stretched until it’s snug. We check for bowed posts and any sag along each run. Gates get hung, aligned, and latched. You can walk the full run with us here and call out anything that catches your eye. This is the day the fence starts looking like a fence.
5. Final walk, hardware, and cleanup (day 5)
We set the finish coat on cut ends, hang the gate hardware, and clear the site so no concrete chunks or clipped wire are left behind. You get a walkthrough of the work and the warranty details in writing. For durable posts and top-rail steel that hold their shape in the September sun, we lean on forged and galvanized components, the kind of material that matches the quality we’d use on a driveway install with Cambridge Pavers or a paver patio.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Choices You’ll Make on a Chain Link Fence
Chain link isn’t one product; it’s a set of decisions that change cost and how the fence holds up. Here’s what matters most and the honest trade-offs.
- Fabric gauge: 11.5-gauge is the standard residential choice and usually adequate for a yard boundary. 9-gauge is heavier and takes more of a beating, better for a corner lot or a dog that pushes on it. The heavier wire costs noticeably more per foot, and you’ll feel it in the quote.
- Post and rail weight: light posts and 1⅜-inch top rails flex over time; 1⅝-inch and heavier rail hold up better in the South Florida heat. A braced corner and a terminal post tied back properly stop a lot of sag.
- Coating and finish: galvanized steel is the workhorse and the cheapest. Vinyl-coated (usually green or black) hides the metallic look, holds up against the salt-laden air off Biscayne Bay, and costs a little more. If you want it to read less like a utility fence, go coated.
- Height and gates: 4 feet is fine for a pet line or a low marker; 5 and 6 feet suit a backyard or pool-deck perimeter. A walk gate adds cost; a drive gate does more. You decide gate count and swing direction up front.
- Top rail vs. bottom rail: a full top rail is standard; add a bottom tension wire for a tauter run and fewer gaps a small dog can nudge through.
What a Chain Link Fence Costs in Sunset, FL

Expect $3,500 at the low end and $9,000 at the high end for a chain link fence in Sunset, FL, with most single-family yards landing in the middle. The exact number comes down to five things:
- Linear footage: this is the biggest driver. A 100-foot run and a 300-foot run are very different jobs.
- Corners and posts: every corner, terminal, and gate post needs a properly braced set. A yard with six corners and two gates costs more than a straight run.
- Fabric and post grade: moving from 11.5-gauge to 9-gauge and from light to heavy rail pushes you toward the top of the range.
- Site conditions: hard rock, roots, or an existing old fence that has to come out add labor. A clear line with good soil keeps it near the low end.
- Permit scope: if your run needs a Miami-Dade County permit and setback check, factor that in. Simple interior lines may not.
A written estimate should spell out the footage, the fabric and post gauge, the gate count, whether haul-away of an old fence is included, and the permit line if one applies. What it typically shouldn’t include: sod repair beyond light grading, and any sidewalk or concrete cutting. Upfront pricing, no surprises – the number you see on the signed quote is the number you pay. Call (833) 630-4214 for an exact figure.
See the difference
Before
After
Before
After
Before
AfterWhat Sunset Properties Do to a Chain Link Job
Sunset is unincorporated Miami-Dade, west of Pinecrest and east of the Turnpike, and nearly all fence work here runs through the county building department rather than a city hall. That matters because county inspectors check hurricane-zone product requirements on exterior work, and a fence line sitting near a pool or along a property edge has to clear setback rules we confirm before digging. Under the Florida Building Code’s High-Velocity Hurricane Zone rules, exterior work carries product-approval requirements, and that’s the kind of detail out-of-area crews miss and county inspectors catch. The 33173 ZIP is mostly 1960s through 1990s ranch homes on generous lots, plus newer two-story rebuilds on teardown lots, so we see a lot of long property lines, an old fence to pull, and homeowners who want it done in one trip. Summer rains expose any drainage issue fast, so we plan the run so water still flows where it should. If you’re also reworking the lot, homeowners often pair this with ADU Site Prep & Utilities in Sunset or a Door Installation in Sunset while crews are already on site. When a chain link fence is part of a larger Fence Installation in Sunset plan, we line the phases up so nobody digs twice. We cover Sunset and the nearby neighborhoods, and our Fence Installation service covers the full scope if you’re weighing materials beyond chain link.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Sunset

Three to five working days is the usual window for a standard residential run, with the concrete cure and any county permit adding to that. A short straight line can wrap faster; a long run with several gates takes the full stretch. Call (833) 630-4214 to get a date on the schedule.
It depends on the run – interior property lines often don’t, while front-yard or pool-adjacent fencing usually does, and Sunset falls under Miami-Dade County permitting either way. We check the setback and pull what’s required before we dig. Call us and we’ll tell you what your specific line needs.
Yes. A chain link fence only disturbs the ground along the line, so it doesn’t involve plumbing, electrical, or the house structure unless a line runs right through the path. The one-call locate on day one protects buried utilities. Call (833) 630-4214 if you’re unsure what runs under your yard.
Most jobs land between $3,500 and $9,000, driven by footage, gate count, and the gauge you choose. Heavy wire and coated finishes sit toward the top; a short straight run sits near the bottom. Call (833) 630-4214 for an exact quote – estimates are free.
Our work is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers installation and workmanship, and material warranties come from the manufacturer. Ask for the written terms when you get your estimate.
Get a Free Chain Link Fence Estimate in Sunset
Call (833) 630-4214 to schedule a free on-site estimate for your chain link fence in Sunset. A live person answers around the clock, and the visit includes a walk of the property, a confirmed layout, and a written line-item quote with the footage, gauge, and gate count spelled out. No pressure, no vague ballpark. Financing is available if you want to spread the cost, and every job carries the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












