







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom window and door orders in Westchester typically run $8,000 to $25,000 for a whole-house impact package, with a single custom door landing between $1,800 and $9,000 and full window replacement running $4,500 to $15,000. Those ranges cover product, Florida product approval documentation, and installation. What moves the number most is the opening size, the glass package, and how much of the existing framing has to change.
How Much Does Custom Window & Door Order Cost in Westchester?
Custom window and door orders in Westchester cost $8,000 to $25,000 for a whole-home impact package, $4,500 to $15,000 for a standard window replacement scope, and $1,800 to $9,000 for a single custom entry or patio door. A one-off specialty window – a radius, an oversized picture unit, a corner mullion – usually lands between $1,200 and $4,500 installed.
Westchester sits in Miami-Dade County, which runs on the strictest wind-borne debris rules in the country. Almost nothing here is off-the-shelf. An order typically means aluminum or vinyl frames built to a specific opening, tempered or laminated glass rated to the county’s impact standard, and a Notice of Acceptance number on the product before it ships. That paperwork is part of the price.
We quote window and door orders as part of a full exterior scope, from foundation to finish line, so the number you see is the number you pay. If you want a real figure for your house, a free estimate takes about an hour. Call (833) 630-4214 and a live person answers, any hour.
Key Takeaways
- Whole-home custom impact packages in Westchester: $8,000 to $25,000
- Standard window replacement: $4,500 to $15,000
- Single custom door, installed: $1,800 to $9,000
- Custom orders take 8 to 16 weeks for fabrication, on top of installation
- Miami-Dade product approval and permit fees are a real line item, not a surprise
- 0% financing for 18 months and $1,000 off projects over $10,000 apply to window and door orders

Custom Window & Door Order Cost Breakdown (2026)
Here’s where the money goes on a typical Westchester order. These ranges hold whether you’re in a 1960s ranch off Miller Drive or a newer build in the Westchester Gardens area.
| Line item | Typical range in Westchester |
|---|---|
| Custom entry door (wood, fiberglass, or aluminum-clad), installed | $1,800 – $6,500 |
| Custom sliding glass door, impact-rated, installed | $2,500 – $9,000 |
| French or patio double doors, custom, installed | $3,200 – $8,500 |
| Single impact window, custom size, installed | $600 – $1,800 |
| Specialty window (radius, arch, oversized picture), installed | $1,200 – $4,500 |
| Standard window replacement, whole home | $4,500 – $15,000 |
| Custom impact window package, whole home | $8,000 – $25,000 |
| Impact-rated glass upgrade (per opening) | $250 – $900 |
| Historic or HOA-matched profile fabrication | $400 – $2,500 |
| Miami-Dade permit and product approval documentation | $350 – $1,400 |
| Rough opening correction or reframing (per opening) | $300 – $1,100 |
| Interior trim and finish carpentry (per opening) | $150 – $600 |
Two lines drive most of the variance. Glass is the first: laminated impact glass with a low-E coating runs meaningfully more than a basic impact unit, and in a Westchester home facing west toward the Everglades, the coating pays you back in cooling bills. Frames are the second. A thermally broken aluminum frame with a narrow sightline is a premium product and prices like one; a standard vinyl frame does the same structural job for less.
Labor is more predictable here than in most markets because the crews who do this work do it constantly. What surprises people is the rough opening. A 1970s Westchester home may have an opening that’s out of square by half an inch, and a custom unit built to the wrong dimension means a return trip and a charge nobody wants. We measure every opening before the order goes in.
For a broader look at how window and door work fits into a larger exterior scope, see our home page.
What Affects Custom Window & Door Order Pricing in Westchester
Six things move the number on a Westchester order more than anything else.
- Miami-Dade impact requirements. Every opening here needs a product with a valid Notice of Acceptance. Non-impact units exist but require an approved shutter system, and the combined cost of shutters plus standard glass usually beats the savings you thought you were getting.
- Hurricane season timing. Orders placed between April and June compete with storm-season demand. Fabrication slots in South Florida fill fast, and rush fees of $500 to $1,500 appear when you need a delivery date in weeks instead of months.
- Opening dimensions. Standard rough openings cost standard money. Once a unit is oversized, arched, or built to a non-catalog dimension, you’re paying for custom tooling and a separate approval package.
- Salt air and humidity. Westchester is close enough to the coast that aluminum hardware and fasteners need a marine-grade finish. Skipping that upgrade saves $200 and costs you a corroded door handle in four years.
- HOA and architectural review. Several Westchester neighborhoods require matching sightlines, frame colors, and profiles to the original build. Custom profile fabrication to satisfy an architectural review adds $400 to $2,500 and adds weeks to the timeline.
- Frame material. Wood, aluminum-clad wood, fiberglass, vinyl, and thermally broken aluminum each price differently, and each has a different service life in Florida heat. Andersen and Marvin lines sit at the premium end; that cost shows up in both the unit price and the craftsmanship of the install.
One more factor that isn’t obvious until you’re in it: the permit timeline. Miami-Dade reviews window and door permits carefully because of the product approval requirement. A clean submittal moves in two to three weeks. One missing piece of documentation resets the clock. We handle the submittal, which is why we build that line into the quote instead of surprising you later.
For a full picture of the neighborhood-level work we do, our Westchester service area page covers the communities we work in most.

How to Save on Custom Window & Door Order
The biggest lever isn’t the product. It’s the scope and the timing.
- Bundle the whole house. Ordering twelve openings at once saves $150 to $400 per unit versus ordering them in phases, because fabrication, permitting, and delivery costs spread across the whole order instead of repeating three times.
- Order in the shoulder season. Placing a custom order in October or November avoids peak storm-season pricing and lands installation before the following June. We’ve seen clients save $1,000 to $2,000 just on the scheduling side.
- Choose standard sizes where the design allows. If your openings are close to a catalog dimension, adjusting trim by an inch or two can turn a custom order into a semi-custom one. That’s often $300 to $800 per opening.
- Take the standing promotions. We offer $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. On a $20,000 package that combination changes the monthly number substantially.
- Don’t skip the energy upgrade. Low-E and argon-filled glass costs $250 to $900 more per opening and cuts cooling load in a Florida home immediately. It isn’t a savings trick; it’s a cost that pays itself back.
The other savings come from doing it right the first time. Our technicians have up to 12 years of experience, and we put a 730-Day Done Right Promise behind every installation. If something isn’t right, we make it right. For a free estimate on your specific openings, call (833) 630-4214. Upfront pricing, no surprises.
FAQs – Custom Window & Door Order Cost
How much does a custom window order cost in Westchester?
A whole-home custom window order in Westchester runs $8,000 to $25,000 for an impact package, or $4,500 to $15,000 for a standard replacement scope. Single custom windows range from $600 to $1,800 installed. Call (833) 630-4214 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a window in Westchester?
Repair is cheaper when the frame is sound and the issue is a single pane, a gasket, or hardware, and that runs $150 to $600. Replacement makes more sense once a window is leaking air, fogging between panes, or failing an impact requirement. Below $800, repair usually wins. Above that, replacement often costs about the same and gains you a product under warranty. Call us and we’ll tell you which side of that line you’re on, no charge.
How long does a custom window and door order take in Westchester?
Expect 8 to 16 weeks from signed order to installation day. Miami-Dade product approval and permit review add two to four weeks on top of fabrication. Installation itself is usually one to three days for a whole-home package. If you need a date certain, call (833) 630-4214 and we’ll tell you what’s realistic right now.
Do I need a permit for window and door replacement in Westchester?
Yes. Miami-Dade County requires a permit for window and door replacement, and the product needs a valid Notice of Acceptance on file. Permit and documentation costs typically run $350 to $1,400 on a residential order. We handle the submittal as part of the job. Call for a free estimate that includes the permit line so there’s no surprise.
Can you come today for a window or door estimate in Westchester?
In most cases yes, and always within 48 hours. Calls are answered by a live person 24 hours a day, seven days a week, so you’re not leaving a voicemail on a Friday night and waiting until Monday. Call (833) 630-4214 and we’ll schedule your free estimate and design consult.
What’s Actually in a Custom Order (and Why It Costs What It Does)
A custom window or door order isn’t one product. It’s a stack of decisions that each carry a price and a lead time.
Product approval. In Miami-Dade, every impact-rated window and door must carry a Notice of Acceptance filed with the county. That’s a testing and documentation process the manufacturer has already done, but it limits which products you can legally install. It also means the cheap unit you found online almost certainly isn’t approved for this county, and installing it fails inspection. We only quote products with current approval.
Frame and glass specification. A frame is aluminum, vinyl, fiberglass, or wood, and each behaves differently in Florida. Glass is monolithic, laminated, or insulated, with or without a low-E coating. A single-pane clear unit and a laminated low-E impact unit look identical from the street and cost very differently. We walk every client through that trade-off, because it’s where the biggest price swing lives.
Fabrication lead time. Custom means built to your opening, so nothing is pulled off a shelf. That’s 8 to 16 weeks in South Florida, longer if the profile is unusual or the frame color is custom.
Permitting and inspection. Miami-Dade requires a permit, an inspection, and a final sign-off. That’s cost, but it’s also your protection. An unpermitted window install can complicate a future sale or insurance claim, and insurers in this market increasingly ask for documentation.
Installation craftsmanship. Flashing, sealing, and trim are where most window leaks start. A proper install uses specific flashing detail at the sill and head, and that’s the part you can’t see once it’s finished. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform.
We’ve seen the full range of situations in Westchester. A home near the Coral Way corridor with original 1960s jalousie windows is a very different job than a newer build with impact units already in place. Both get the same honest number up front.
Why We Quote Window & Door Orders the Way We Do
Most window quotes are vague for a reason: it’s easier to leave out the permit, the rough-opening correction, and the finish carpentry, then add them later. We don’t work that way.
Every estimate from us is itemized, with product, installation, permit, and finish lines separate so you can see what you’re paying for. The number you see is the number you pay. If we open a wall and find something we didn’t anticipate, you hear about it before we touch it.
And every job is backed by our 730-Day Done Right Promise. That’s one of the longest workmanship guarantees in residential construction. Two years is enough time to catch a leak, a sticking door, or a seal that failed in a Florida summer. If it happens, we make it right.
Warranties are only as good as the company behind them. We’ve been in business since 2014 and we proudly serve local communities across our markets. Calls are answered by a live person 24 hours a day, seven days a week. No voicemail. No waiting until Monday morning.
Frequently Overlooked Costs on a Westchester Window Order
A few line items catch homeowners off guard. None of them are large, but all of them are real, and all of them should appear in a good quote.
- Interior repair after removal. Removing an old unit usually means drywall patching and repainting around the opening. Budget $150 to $600 per opening if you want it finished flush.
- Exterior stucco repair. Florida homes are stucco-clad, and stucco repairs around new openings range from $200 to $800 each depending on the size of the cut and whether the texture has to match.
- Old unit disposal. A whole-home package generates a significant amount of debris. Haul-away runs $300 to $700 for the job.
- Screen and shutter removal. If existing shutters or screens have to come off and be stored or disposed of, that’s labor.
- Furniture and floor protection. Serious installers move and protect furniture without being asked. If a quote doesn’t mention it, ask.
None of these belong in a surprise invoice at the end. They belong in the estimate. We itemize all of them.
Ready to Price Your Westchester Window & Door Order?
Call (833) 630-4214 for a free estimate and design consult. A live person answers any hour of the day. We’ll measure every opening, walk you through the glass and frame options, and give you a written, itemized number with the 730-Day Done Right Promise behind it. If your project is over $10,000, you’ll see $1,000 off, plus 0% financing for 18 months on approved credit.
From foundation to finish line, we handle the whole scope. Windows and doors pair naturally with other exterior work, including roofing and home additions projects we run throughout Westchester.
Written by the team at Groundwork Construction Co.
Pricing reflects the Westchester market as of 2026. Groundwork Construction Co. of Westchester offers free estimates – call (833) 630-4214.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong












