







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westchester Homeowners Choose PGT Construction
Groundwork Construction Co. of Westchester provides independent service, repair and installation for PGT windows and doors across Westchester, FL. We’re not the manufacturer and we’re not authorized by them, but PGT systems are part of our daily work in Miami-Dade’s wind-borne debris region, so we know which series fits an opening and how the HVHZ paperwork has to line up. WinGuard aluminum, WinGuard vinyl, Sentinel sliders, Premier series: we specify them correctly the first time. Live person, 24/7. Call (833) 630-4214 for a free estimate.
Westchester is unincorporated Miami-Dade, which shapes every PGT job here. There’s no city building department to walk into. Permits, product approval and inspections all run through county e-permitting, and any impact-rated unit you install or replace has to carry a live Notice of Acceptance (NOA) on file with Miami-Dade. Get that wrong on a PGT swap and you’re looking at a failed inspection or a policy dispute after a storm. We treat NOA documentation as part of the job, not paperwork to sort out later.
Why Trust Groundwork Construction Co. of Westchester for Your PGT Construction?

Our technicians have up to 12 years of experience, and a good share of it sits in PGT’s aluminum and vinyl impact lines. They can tell a WinGuard slider with a worn tandem roller from one with a racked frame just by how the panel sits in the track. That matters because the fixes are completely different, and guessing wrong wastes your money.
We use PGT OEM or exact-match aftermarket parts sized to the specific series: rollers, pile weather seals, glazing gaskets, latches and lock hardware. On impact-rated units, a generic roller or a universal seal is where fit and water performance start to slip. We order to the series, not to “close enough.”
Every PGT repair, replacement and install is covered by the 730-Day Done Right Promise. If the work isn’t right, we make it right, in writing, for two years. On a window or door that has to protect your house through hurricane season, that’s the part worth reading twice. Upfront pricing, no surprises, and background-checked, uniformed technicians on every call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Westchester
These are the PGT issues we see most, why they happen, and what they actually point to.
- Worn tandem rollers on heavy WinGuard and Sentinel sliders. Big impact panels ride on tandem rollers, and South Florida grit plus constant use wears the wheels and the track. The panel starts dragging, the latch won’t line up flush, and sometimes the frame begins to rack from people forcing it. We replace rollers with series-correct parts and check the frame before the panel goes back in.
- Compressed pile weather seals at the track. Miami-Dade’s summer heat and rain flatten pile weatherstripping on WinGuard sliders over time. You’ll hear whistling on windy days and find water in the track after driving rain. That’s a seal problem, and it usually shows up alongside a clogged weep path that needs clearing at the same visit.
- Failed seals and fogging in insulated impact glass (IGUs). WinGuard fixed and operable units are double-pane, and the perimeter seal eventually gives out with sun and pressure cycling. Once it fails, you get fog or a cloudy film between the panes that no cleaning will fix. The glass unit gets replaced, not the whole window, when the frame is still sound.
- Finish breakdown and corrosion on aluminum PGT frames. Salt air and wind-driven rain attack aluminum PGT frames at cut edges, weep holes and sill pans, which is where coatings are thinnest. Left alone, corrosion pits the frame and travel starts to bind. The fix is cleaning, touch-up and re-weathering the sill pan before it spreads.
- Sill-pan and flashing failures on Westchester installs. On 1960s-80s concrete-block homes and newer two-story infill, water gets behind a poorly detailed window opening and shows up as interior staining far from the window itself. Miami-Dade’s driving rain and HVHZ flashing rules mean the sill pan and flashing have to be built right at installation. We correct the detail, not just the symptom.
A typical PGT job starts with a homeowner noticing a WinGuard slider that drags, won’t latch flush, or leaks at the sill during driving rain. The usual cause is worn tandem rollers plus compressed pile weatherstripping and a clogged weep path, sometimes compounded by a failed IGU seal. A qualified local pro pulls the panel, replaces rollers and seals with series-correct parts, clears and re-weathers the sill pan, verifies latch and lock engagement, then confirms the unit still meets its design-pressure label before closing out.
PGT Parts & Our Repair-vs-Replace Approach

We don’t keep a PGT parts shelf. Each job is quoted against the actual series and opening, and OEM or exact-match aftermarket parts are ordered for that unit. It’s the only way to keep fit and water performance where PGT designed them, especially on impact-rated doors where a sloppy roller throws off the whole panel.
Our repair-or-replace call is honest and simple. If the frame is straight and sound, we replace failed IGUs, worn rollers and seals and keep your existing unit. If the frame is racked, corroded through at the sill or weep points, or the opening needs a different design-pressure rating than the unit delivers, replacing the whole window or door makes more sense than chasing repairs. We’ll tell you which side of that line your PGT unit sits on. Call (833) 630-4214 for a free estimate and we’ll walk the openings with you.
Our PGT Service Process – Step by Step
- 1
Diagnose. We check the panel, tandem rollers, pile seals, weep holes, sill pan and IGU seal, and confirm the unit’s model and design-pressure label so parts match.
- 2
Repair or install. Series-correct rollers, seals and gaskets go in, or the new PGT unit is set with HVHZ-correct flashing and sill-pan detailing. Permits run through Miami-Dade County e-permitting where the scope requires it.
- 3
Test. We operate the panel, check latch and lock engagement, run a water test on new or re-detailed openings, and verify the unit still meets its design-pressure label.
- 4
Warranty. Every job closes under the 730-Day Done Right Promise, with the NOA and product documentation handed to you for your records.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Westchester
We work across PGT’s core lines: WinGuard Aluminum impact-resistant windows and doors, WinGuard Vinyl impact windows, Sentinel by PGT impact sliding glass doors, and the Premier Vinyl series in both non-impact and impact variants. Westchester homes run the range from 1960s-80s concrete-block ranchers to newer two-story infill, and each opening gets matched to the series that fits its size, design pressure and HOA rules. Where the scope calls for a full opening replacement, we’ll pair the window work with proper flashing and, if needed, Roof Replacement & Installation so the envelope is detailed as one system. For impact-rated openings, Impact Window Installation is where we spend the most time getting NOA documentation right.
We Also Service These Brands
PGT is one line we handle well, not the only one. We also work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and Master Halco fencing across our Westchester projects. That means one call can cover a window replacement, a kitchen refresh and a fence, without juggling three contractors and three sets of warranty terms.
FAQs – PGT Construction Service in Westchester

Yes. Because Westchester is in Miami-Dade’s High-Velocity Hurricane Zone, any replacement impact window or door must have a current Miami-Dade NOA for that product and installation detail. We confirm the NOA before ordering and submit it through county e-permitting. If you’re unsure what your unit carries, call (833) 630-4214 and we’ll check before any work is scheduled.
A dragging, leaking Sentinel slider usually means worn tandem rollers combined with compressed pile weatherstripping and a clogged weep path. The heavy impact panel wears the rollers faster than a standard door, and once the seal flattens, wind-driven rain gets past the track. Replacing the rollers and seals with series-correct parts and clearing the weep path is the standard fix. Call (833) 630-4214 for an exact quote; estimates are free.
Yes, in most cases. Fogging means the IGU seal has failed, and the glass unit itself can be replaced while the frame stays. We only recommend a full unit replacement if the frame is racked or corroded through. Call (833) 630-4214 and we’ll tell you which fix your window actually needs.
Yes. Miami-Dade’s HVHZ rules and heavy summer rain make flashing and sill-pan detailing critical, and a window installed without them will leak behind the wall where you can’t see it. We detail sill pans and flashing to county standard on every install and test the opening before we close out. Call (833) 630-4214 to schedule your free estimate.
WinGuard aluminum frames are stronger and better suited to large openings and salt-air exposure, while WinGuard vinyl offers good thermal performance and a cleaner look at a lower frame profile. The right pick depends on opening size, design pressure and your home’s construction. We’ll match it to your Westchester home and HOA. Call (833) 630-4214 for a free consult.
Impact window installation in Westchester runs $8,000 – $25,000, standard window replacement runs $4,500 – $15,000, roof replacement runs $8,000 – $20,000 and roof repair runs $400 – $1,800. Your final number depends on opening count, series and whether roof detailing is involved. Call (833) 630-4214 for an exact quote; estimates are free.
| Service | Price Range (Westchester) |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Book Your PGT Service in Westchester, FL
Whether it’s a dragging Sentinel slider, a fogged WinGuard IGU or a full impact window install on a Westchester two-story, we’ll walk the openings, confirm the NOA and quote it upfront, no surprises. Live person, 24/7, and every job backed by the 730-Day Done Right Promise. Call (833) 630-4214 for a free estimate.
Written by the team at Groundwork Construction Co. of Westchester.












