







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinets & Countertops in Westchester, FL
Cabinet and countertop replacement in Westchester, FL typically runs $6,800 to $14,500 for a standard 10×10 kitchen with semi-custom cabinets and quartz, and most of that work gets finished in two to three weeks once materials land. We handle the full swap here at Groundwork Construction Co. of Westchester: tear-out, layout changes, cabinet set, countertop templating and install, sink and faucet reconnection, and the patching and paint at the edges that other crews leave for you. If your kitchen has good bones but the boxes and surfaces are dated, this is the highest-return dollar you can spend before you touch anything else.
We do this under our Kitchen Remodeling in Westchester service line, which means your cabinet job gets planned by the same team that handles the whole room if the scope grows. What separates our cabinet and countertop work isn’t a slogan. It’s the KraftMaid and Cambria partnerships that get you real material options instead of whatever a supply house has on the floor, background-checked, uniformed technicians on every install, and the 730-Day Done Right Promise covering the workmanship. If a door sags or a seam fails inside that window, we come back and make it right. Call (833) 630-4214 and a live person answers, any hour.
Westchester is a specific kind of kitchen market. A lot of the housing stock here went up in the 1970s through 1990s, and those kitchens were built with 24-inch-deep base cabinets, laminate over particleboard, and a drop-in sink cut into a 10-foot run. By the time a homeowner calls us, the laminate is lifting at the sink edge, the particleboard under it has swollen from a decade of drip, and the cabinet boxes themselves are usually still solid. That’s a good problem. It means you can usually keep the layout and the plumbing and put your money into doors, drawers, and stone instead of framing. It also means the tear-out has to be done carefully so the drywall and tile behind the old backsplash survive.
Our technicians have up to 12 years of experience on cabinet and counter jobs, and the ones who template stone have seen every version of a Westchester kitchen that’s out of square. That matters more than it sounds. A countertop that’s templated wrong in a 1980s Westchester kitchen with a bowed wall comes back two weeks later and doesn’t fit, and by then your old counter is in the dumpster.
Key takeaways
- Cabinet and countertop replacement in Westchester usually lands between $6,800 and $14,500 for a full 10×10 kitchen.
- Most jobs take two to three weeks from tear-out to final walkthrough, and stone fabrication is usually the long pole.
- If your cabinet boxes are solid and the layout works, replacing doors, drawers, and surfaces saves thousands over a full gut.
- Cambria quartz and KraftMaid cabinetry are the two brands most of our Westchester clients land on, though we quote options at several price points.
- Every install is backed by the 730-Day Done Right Promise and priced upfront, so the number you approve is the number you pay.

When You Need Cabinets & Countertops
Most homeowners don’t wake up wanting new cabinets. Something breaks or a threshold gets crossed. Here are the situations we see most often in Westchester kitchens, and each one has a different honest answer about whether you fix it, reface it, or replace it.
- The counter is delaminating around the sink. This is the number one call we get in Westchester. Laminate lifts at the sink cutout first because that’s where water sits, and once the substrate swells you can’t glue it back. A new counter fixes the symptom; we also check the cabinet floor under the sink, because that’s where the real rot hides.
- The cabinet boxes are fine but the faces are shot. Doors peeling at the edges, drawers that don’t close flush, a hinge that’s pulled out of the particleboard twice. In Westchester’s humidity, thermofoil and laminate faces fail long before the plywood boxes do, and that’s a door-and-drawer swap, not a full rebuild.
- You want more counter space without moving walls. Swapping a peninsula for an island, or adding a cabinet run where a breakfast nook used to be. We do this regularly in the 3/2 ranches and two-story homes around Westchester, and the answer often depends on whether the sink drain and vent can move without opening the slab.
- The kitchen layout fights how you actually cook. The range is in a corner, the fridge door hits the counter, there’s no landing space next to the sink. Sometimes that’s a cabinet reconfiguration that costs a fraction of what people expect.
- You’re prepping to sell and the kitchen is the anchor. Buyers in this market walk in and judge the kitchen first. Fresh cabinetry faces and quartz counters photograph well and appraise well, and the work is fast enough to hit a listing date.
- Water damage behind the dishwasher or ice maker. Slow leaks travel sideways under a counter for months. When you pull the appliance and find soft cabinet sides, that’s a cabinet replacement on that run, not a surface fix.
One note specific to Westchester: the drop-in sinks and 4-inch backsplash strips from the original builds make counter conversations longer than clients expect. A new counter almost always means a new sink, because the old drop-in has a lip that a new slab won’t accommodate without an undermount cut. We price that in upfront rather than surprising you at install. Our home page has the full picture of how we run projects across every service we offer.
Our Cabinets & Countertops Process
We’ve done enough of these to know where they go sideways. The process below is built to make the stone fit and the timeline hold.
- In-home measure and design consult. We measure the actual kitchen, not the drawing. Walls get checked for bow and out-of-square, cabinet depth gets confirmed, and we talk through brands and finishes. You’ll see KraftMaid options and Cambria slab samples side by side so you’re picking from real material, not a photo on a phone. This consult is free and part of the estimate.
- Written estimate with upfront pricing. Line items, not a lump sum. Cabinet cost, counter cost, fabrication, tear-out, plumbing reconnection, electrical if we’re adding an outlet, patching and paint, and the permit line if one applies. The number you approve is the number you pay, and we’ll break it out so you can see what changes if you pick a different slab or a different door style.
- Order and material staging. Cabinets and slabs get ordered and held until everything lands before we tear out a single box. Nobody’s kitchen sits half-gutted for three weeks waiting on a delivery. Where the county requires a permit for plumbing or electrical changes, we pull it.
- Tear-out and cabinet install. Old counters come out, old cabinets come down, and we protect the floor and the adjacent rooms. Cabinet set includes leveling and shimming the boxes so doors and drawers line up without adjustment calls later. Sink, dishwasher, and ice maker connections get checked before the new base cabinets close up.
- Template and stone install. A template gets made on the installed boxes, scanned, and cut. Stone install is the day the kitchen snaps into focus, and it’s also the day we check overhang, seam placement, and sink cutout alignment before we walk out. Undermount sink and faucet go in at the same time.
- Final walkthrough and handoff. Backsplash, patching, paint touch-ups, and a full check of every door and drawer. We walk the kitchen with you and fix anything on the spot. Everything after that falls under the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right.
Our technicians have training across both cabinet install and stone fabrication coordination, which means fewer hand-off gaps between trades. When the templater and the installer work from the same measurements, the counter fits the first time.

Cabinets & Countertops Pricing in Westchester
Here are honest ranges for Westchester kitchens, based on what we actually bid. Prices include materials and labor but not appliance changes or structural work. Every project gets a free estimate and design consult, so treat these as planning numbers, not a quote.
| Scope | Typical range in Westchester |
|---|---|
| Cabinet refacing (doors, drawers, veneer) | $3,800 – $6,500 |
| Stock cabinets, 10×10 kitchen | $4,200 – $7,800 |
| Semi-custom cabinets (KraftMaid line) | $6,500 – $12,000 |
| Laminate counter, 30 – 40 sq ft | $1,200 – $2,400 |
| Quartz or stone counter (Cambria, granite) | $3,200 – $6,200 |
| Sink and faucet, installed | $550 – $1,400 |
| Tear-out and haul-away | $450 – $900 |
| Plumbing reconnection | $350 – $800 |
| Patching, backsplash, and paint | $600 – $1,800 |
What drives the number up or down: door style and cabinet grade, slab choice (a Cambria quartz sits higher than granite, and exotic slabs go higher still), whether the sink and dishwasher move, whether the run is longer than 10 feet, and whether the county requires a permit for the plumbing work. In Westchester kitchens that are more than about 25 years old, we sometimes find the shutoff valves behind the sink are seized, which adds a small plumbing line item but saves you a surprise.
We keep this affordable without pretending it’s cheap. There’s 0% financing for 18 months, and $1,000 off projects over $10,000. If you’re weighing a full reface against a full replacement, ask us for both numbers on one page.
FAQs – Cabinets & Countertops
How much does cabinet and countertop replacement cost in Westchester, FL?
A full 10×10 kitchen with semi-custom cabinets and quartz typically runs $6,800 to $14,500 in Westchester. That covers cabinets, counters, tear-out, sink reconnection, and finishing. Custom cabinetry or large-format stone can push higher. Call (833) 630-4214 for an exact quote. Estimates and design consults are free.
Is it cheaper to reface my cabinets or replace them?
Refacing is cheaper, usually $3,800 to $6,500 versus $4,200 to $7,800 for new stock cabinets, and it’s the right call when the boxes are solid. Reface when the problem is only the doors and drawer faces. Replace when the boxes are warped, swollen from water, or the layout needs to change, because refacing doesn’t fix any of that. Call (833) 630-4214 and we’ll tell you straight which one your kitchen actually needs.
How long does a cabinet and countertop job take?
Most Westchester jobs run two to three weeks from tear-out to final walkthrough. Cabinet install is quick; the wait is stone fabrication and template scheduling, usually 7 to 10 business days. We hold all material before tear-out so you’re never stuck with a bare kitchen. Call (833) 630-4214 to get a timeline for your kitchen.
Can you install quartz or stone counters on old cabinets?
Usually yes, if the boxes are dry, level, and structurally sound. Stone needs a rigid base, so we inspect and re-secure the cabinets before templating, and replace any box that’s soft or out of level. Doing it the other way around means a counter that cracks or a seam that opens. Call (833) 630-4214 and we’ll assess your cabinets during the free consult.
If you’re planning a cabinet and countertop project in Westchester, call (833) 630-4214. A live person answers around the clock, no voicemail, no waiting until Monday, and we’ll schedule your free estimate and design consult at a time that works for you. We’ll bring real material samples, give you upfront pricing with no surprises, and back the install with the 730-Day Done Right Promise. One call is all it takes to get this moving.
Written by the team at Groundwork Construction Co. of Westchester, serving Westchester.


