







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Sunset, FL: What the Job Involves and What It Costs
Paver driveways in Sunset, FL typically run $7,000 to $18,000 for a full installation, and most jobs take five to eight working days from demolition to the last sweep of joint sand. The work includes tearing out the old surface, excavating to depth, compacting a stabilized base, laying a filter fabric, setting the pavers on a sand bed, cutting the edges, and running a plate compactor over the finished field. Call (833) 630-4214 for a free on-site estimate.
How We Actually Build a Paver Driveway, Stage by Stage

Nobody wants a vague promise that everything will be handled. Here’s the real sequence, and what you’ll be deciding along the way.
Stage 1: Site visit and layout (day 1, about 90 minutes)
We measure the drive, check the slope away from the garage slab, and look at what’s underneath. Is there old concrete that has to come out whole or be broken? Are there irrigation lines, a hose bib, or a pool pump conduit running under the footprint? You’ll decide the paver pattern, the border style, and where the drive meets the apron. That’s the meeting to have your questions ready for.
Stage 2: Demolition and excavation (days 1 to 2)
Out comes the old surface, then we dig down to the depth the base needs. For a residential drive carrying cars and light trucks, that’s usually a 6-inch compacted base plus the sand bed and paver thickness. Sunset lots often have sandy soil that drains well but shifts under load, so we’ll bring in crushed limestone and compact it in lifts rather than dumping one thick layer and hoping.
Stage 3: Base, grading, and compaction (days 2 to 3)
This is the stage that decides whether the drive still looks flat in eight years. We build the base in 2-inch lifts, water it, and run the plate compactor over each one. Drainage gets set here too: a slight pitch to the street or a proper outfall, never toward the garage. Homeowners tell us later that this was the part of the process they didn’t know to ask about.
Stage 4: Paver installation (days 3 to 4)
Filter fabric goes down, then the sand bed is screeded to a consistent depth, then the pavers go in. Border courses get cut and locked in with edge restraint, which is what keeps the field from creeping outward. A 400-square-foot drive takes a crew most of a day; a wide drive with two cars and a turnaround takes longer.
Stage 5: Compaction, sand, and cleanup (day 4, plus a short return call)
We compact the finished field, sweep polymeric joint sand across it, mist it to activate the binder, and clean off the site. You’ll get a walkthrough and a look at how the water drains. If anything needs adjusting, that’s the moment to say so. Our 730-Day Done Right Promise covers the workmanship after we’ve packed up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Choices You’ll Make Before We Break Ground
You’ll want to sort out material, size, and color before install day. Each option has a real trade-off.
- Interlocking concrete pavers. The standard for Sunset driveways. They come in 60mm to 80mm thickness; go with 80mm for a driveway and save the 60mm for walkways. Cost is the middle of the range, durability is strong, and a cracked unit can be swapped out later.
- Clay brick pavers. Warm, traditional, and they hold color well in South Florida sun. They cost more and need a proper base since they’re less forgiving of settlement. Worth it if you want the look that lasts three decades.
- Permeable pavers. Open-jointed units that let water seep through to the base. Smart on a lot with drainage trouble, but they need a deeper gravel reservoir and more careful grading, so expect a higher price.
- Pattern and border. A running bond or herringbone field with a soldier-course border is the classic. Herringbone locks better under turning tires; stack bond looks cleaner but is fussier to keep tight.
- Color and finish. Tumbled, shot-blasted, and smooth finishes all exist. Tumbled hides tire marks and small chips; smooth shows them. Brands like Tremron and Unilock are common on this market and both offer Hurricane-zone-rated installation specs.
- Sealer or no sealer. Sealing is a separate job and a separate line item, but it does lock joint sand and make cleanup easier. It’s a choice you can defer.
What Paver Driveways Cost in Sunset, FL

A paver driveway in Sunset runs $7,000 to $18,000, and here’s what pushes a job toward the low or high end.
| Line item | Typical range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement (including tear-out) | $5,000 – $14,000 |
| Driveway sealing (follow-up) | $250 – $700 |
The variables that move the number:
- Square footage. A single-car drive near 300 square feet sits at the bottom; a wide two-car drive with a turnaround near 700 square feet heads for the top.
- What we’re removing. Breaking out old concrete and hauling it off adds cost. Building over bare dirt doesn’t.
- Base conditions. A stable, well-drained subgrade is cheap. A soft or uneven lot means importing and compacting more material.
- Material grade. Permeable systems and clay brick cost more than standard concrete pavers.
- Extras. Curbs, drain boxes for a low spot, or tying into an existing apron all add scope.
Our written estimates are line-item, and the number you see is the number you pay. No-hassle upfront pricing keeps the budget honest from the first week. If the scope changes because something unforeseen turns up under the excavation, we tell you before we proceed, in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Sunset Homes Do to This Job
Sunset sits in unincorporated Miami-Dade County, west of Pinecrest and east of the Turnpike, and almost every construction project here runs through the county’s building department rather than a city hall. That means a paver driveway installation is reviewed against Miami-Dade County’s High-Velocity Hurricane Zone rules, and the pavers plus their setting method need to meet product-approval standards that a contractor from outside the area may not know to check. County inspectors do catch it when they don’t.
The 33173 housing stock shapes the work too. Most of these are 1960s through 1990s single-family ranch homes on generous lots, with a steady wave of two-story rebuilds and additions filling in around them. Older drives tend to be original concrete that has cracked and settled at the apron, and the replacement footprint often runs wider than the original because the lot has room. Our technicians have up to 12 years of experience on this terrain.
The climate drives the rest. Subtropical sun bleaches undeclared paver colors, salt-laden air off Biscayne Bay works on metal edging and drains, and the June through November wet season tests every slope. We see drives fail at the outfall first: water pooling against the garage door or undercutting the edge restraint. Getting that grade right in the base stage is what keeps a Sunset drive dry through a Broward-grade downpour.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Sunset

Most paver driveways in Sunset take five to eight working days, weather permitting. Wet-season rain can add a day or two because we don’t compact a base that’s saturated, and waiting is cheaper than a driveway that shifts in a year. County permitting runs on its own timeline, which we’ll map out for you in the estimate.
Yes. Because Sunset is unincorporated Miami-Dade, a paver driveway installation typically requires a county permit and an inspection. We pull the permits and schedule the inspections as part of the job, so you aren’t chasing the building department. The High-Velocity Hurricane Zone product-approval requirement applies to the paver system here, and we verify that before ordering material.
In most cases, yes. A paver driveway replaces the surface layer and doesn’t touch the plumbing or the house structure. The exception is when an irrigation line, hose bib, or pool conduit runs through the footprint and has to be rerouted or protected. We flag anything like that during the site visit so there are no surprises mid-job.
Paver driveway installation in Sunset runs $7,000 to $18,000 depending on square footage, base conditions, and material. A driveway replacement including tear-out starts at $5,000. Call (833) 630-4214 for an exact quote on your lot; estimates are free and line-itemed so you can see what each part costs.
Every paver driveway we install is covered by our 730-Day Done Right Promise. If the workmanship isn’t right, we make it right within that window. Material warranties come from the paver manufacturer and vary by brand and product line, and we walk you through those before you sign off.
This is part of a full Driveway & Pavers in Sunset project for many homeowners, and if you’re looking at more than the drive, our Driveway & Pavers service covers the wider scope. Homeowners often pair this with Door Installation in Sunset when the front entry needs attention at the same time, and some pair it with Cabinets & Countertops in Sunset during a larger remodel. We handle jobs throughout Sunset and the surrounding area.
Get a Free Paver Driveway Estimate in Sunset
We’ll come out, measure the drive, look at what’s underneath, and hand you a written line-item estimate with the paver options, timeline, and total price. No pressure, no vague bids. Call (833) 630-4214 to schedule your free on-site estimate for paver driveways in Sunset. Calls are answered by a live person, 24/7, and our technicians arrive background-checked and in uniform.
Written by the team at Groundwork Construction Co.












