







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Westchester, FL
Vanities, tile and fixtures are the three layers that decide whether a Westchester bathroom looks finished or looks like a weekend project somebody gave up on. We install vanities that fit the actual dimensions of your room, set tile that survives real family traffic, and hang fixtures that don’t drip, wobble or peel six months down the road. Groundwork Construction Co. of Westchester handles all three under one scope, covered by our 730-Day Done Right Promise, and you can reach a live person at (833) 630-4214 any hour of the day.
This work sits inside a bigger discipline. If your project is more than a vanity swap – a full layout change, a tub-to-shower conversion, moving a drain – the right starting point is our Bathroom Remodeling in Westchester service, because tile and fixtures are decisions made inside that plan, not after it. Our technicians bring up to 12 years of experience to both, and the pricing you get is the number you pay.
Most of the requests we take in Westchester come from homeowners who already bought the vanity, or picked the tile, and now need someone who can install it without cutting corners on the waterproofing that nobody sees but everyone eventually pays for.
Key Takeaways
- Vanity, tile and fixture work in Westchester runs roughly $1,400 for a single vanity replacement to $9,000-plus for a full tile and fixture package in a primary bath.
- Shower tile is a waterproofing job first and a tile job second. The membrane, slope and curb are what fail, not the porcelain.
- Most single-vanity and fixture swaps finish in one to two days and are often completed in a single visit.
- Every job carries our 730-Day Done Right Promise, a real written guarantee on workmanship.
- Upfront pricing before demo, 0% financing for 18 months, and $1,000 off projects over $10,000.

When You Need Vanities, Tile & Fixtures
Some of these are obvious. Some are the kind of thing you notice in the shower one morning and then think about for a year. Here’s what we hear most often from homeowners in Westchester.
- The vanity has given up. Particleboard swells in humidity, and a bathroom is the most humid room in a Florida house. If your cabinet doors are soft at the bottom, the finish is lifting near the sink, or the whole unit rocks when you lean on it, replacement is the honest answer. Water damage around the base is the tell – we find rotted subfloor under a surprising share of originals.
- Grout and caulk lines are failing. Cracked grout along the shower floor, black caulk at the tub deck, or tile that sounds hollow when you tap it. In Westchester, tile over a wood subfloor can telegraph movement, and hairline cracks in a shower pan are usually a sign the pan itself is saturated, not just cosmetically worn.
- You’re changing the tile, not the layout. Maybe the 1990s beige has to go, or the previous owner used a 4-inch square everywhere and you want something larger and easier to clean. A tile-only replacement is a different scope from a remodel, and it can be done without moving plumbing.
- Fixtures are mismatched or failing. A builder-grade faucet that drips, a showerhead with weak flow, towel bars pulling out of drywall, a toilet that rocks on the flange. Small parts, real irritation, and worth fixing in one visit rather than three separate appointments.
- You’re prepping to sell or rent. Buyers in Westchester look at the bathroom early, and a clean vanity, fresh grout and matching fixtures are the three cheapest signals of a maintained home. Renters notice the same things.
- The shower pan is holding water. Standing water after a shower, a persistent musty smell, or tile that never really dries. This is the one we’d flag as urgent – a leaking pan damages framing and drywall below, and it usually costs more to wait than to fix.
Our Vanities, Tile & Fixtures Process
Here’s how a vanity, tile or fixture job actually runs with us, from the first call to the final walkthrough. No mystery phases, no crew showing up unannounced.
- Estimate and measure. We come out, measure the vanity footprint and the tile area, check the plumbing rough-in and confirm what’s actually behind the existing tile. You get a written upfront price before anything is ordered or torn out. Estimates are free, and if you want design input, the design consult is included.
- Material selections. We help you match finish to the room – a vanity that fits the clearance for the door swing, tile sizes that make sense for the floor slope, a faucet that matches the shower valve. Vanities, tile and fixtures have brands we trust, and we bring a curated set of options so you’re choosing quality rather than whatever’s in stock. The premium-partner approach we use on other trades runs the same way here.
- Protect and demo. Floors covered, adjacent rooms sealed off, old vanity and fixtures removed, existing tile taken out with dust control. Drywall and subfloor are inspected while everything is exposed – that’s where surprises hide, and we show you what we find before the price is finalized.
- Rough-in and waterproofing. Plumbing valve positions confirmed, new drain connections made, and the shower or tub surround properly waterproofed with membrane, correct slope and the right backer. This is the step that determines whether the tile job lasts ten years or three. It’s also where we slow down. On a floor or shower, the tile sits on top of a system – the system is what you’re really buying.
- Tile setting and fixtures. Tile laid in the pattern you selected, grouted and sealed, with attention to layout at the corners and cuts at the drains. Vanity set and leveled, countertop installed, faucet, shower trim, mirror, towel bars and toilet reset. Caulk lines are the last thing on purpose.
- Final walkthrough and the promise. We walk the room with you, check slope, check for leaks, check the vanity doors and drawers, and clean up. Then the written 730-Day Done Right Promise kicks in for workmanship. If something isn’t right, we come back and make it right.
Throughout, your technician is background-checked and arrives in uniform. It matters less than the plumbing, but it matters.

Vanities, Tile & Fixtures Pricing in Westchester
Vanities, tile and fixture work in Westchester typically runs between $1,400 for a straightforward single vanity replacement and $9,000 or more for a full tile and fixture package in a primary bath, depending on square footage, tile choice and whether the plumbing has to move. Below are honest ranges. Every job is quoted upfront, so the number you see is the number you pay.
| Scope | Typical Range | What Drives the Price |
|---|---|---|
| Single vanity replacement (cabinet and top) | $850 – $2,400 | Cabinet size, countertop material, sink style, whether faucet reuses existing supply lines |
| Double vanity installation | $1,800 – $4,200 | Width, top material, two sinks, dual faucet sets, plumbing adjustments |
| Floor tile (per square foot, installed) | $9 – $22/sq ft | Tile type, pattern complexity, subfloor prep, removal of old flooring |
| Shower or tub surround tile | $2,600 – $7,500 | Waterproofing system, size, tile format, niche and bench work |
| Faucet and showerhead replacement | $180 – $550 each | Fixture brand, valve condition, access |
| Toilet replacement (installed) | $320 – $900 | Fixture, flange condition, floor repair |
| Full tile and fixture package (primary bath) | $6,500 – $9,000+ | Total square footage, material tier, prep required |
A few things move those numbers. Tile format matters more than most people expect – large-format tile lays faster per square foot but demands flatter substrate, and mosaic tile takes longer in labor. Waterproofing methodology is a cost line, not an upsell; a proper membrane and slope are not optional. And the condition of the substrate stops the conversation until we see it – if the subfloor has rot from a slow leak, that’s discovered after demo, and we tell you before continuing.
On affordability: projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months spreads the rest. Bathroom work is one of the categories where that structure actually helps, because you’re not choosing between doing the whole thing right and doing half of it now.
What the tile actually needs to survive a Westchester bathroom
Westchester isn’t a place where tile fails from cold. It fails from humidity. Bathrooms here stay damp between showers, and the difference between a sound install and a problem install is the layer under the tile. We won’t set tile over drywall in a wet area, we won’t skip the pre-slope on a shower pan, and we won’t caulk over a cracked pan and call it fixed. That stance costs a little more up front and saves the difference many times over in five or six years. It’s the same principle we apply across every trade we work in, from a home renovation down to a single fixture swap.
Matching vanity, tile and fixture finishes
The three elements need to talk to each other. A mid-century walnut vanity with a marble top wants matte black or brushed nickel fixtures and a tile that doesn’t fight it – a simple large-format porcelain reads better than busy marble-look tile in that room. A gray shaker vanity with quartz likes warm brass or polished chrome and a softer tile pattern. We’ll walk you through the combinations on-site so you’re not guessing from showroom photos that were shot under different lighting. The brands we bring into the conversation depend on the room and the budget, and we name them up front rather than vague references to “premium options.”
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity installation cost in Westchester?
A single vanity with cabinet and top installed typically costs $850 to $2,400 in Westchester, and a double vanity runs $1,800 to $4,200 depending on width, countertop and whether the plumbing has to move. Square footage and top material are the two biggest swing factors. Call (833) 630-4214 for an exact quote on your space – estimates are free and there’s no obligation.
Can you install tile and fixtures in a single visit?
Smaller jobs – a vanity swap, a faucet and showerhead replacement, a toilet reset – are often completed in a single visit, typically one to two days of work. Full shower tile and waterproofing take longer because the membrane and mortar need time to cure before tile goes on, and we don’t rush that step. Most full tile and fixture packages finish within a week of starting, and we’ll give you a clear timeline before we begin.
Is it cheaper to repair or replace a shower pan?
Replacing the shower pan is almost always cheaper over time than repairing one that’s already leaking, because a patch hides the problem rather than solving it. A proper fix means removing the tile, replacing the pan and re-waterproofing, which runs $2,600 to $5,500 for a standard shower depending on size and tile. A patch job looks cheaper today and costs more once the leak reaches the framing. If you’re not sure which applies, call (833) 630-4214 and we’ll assess it before you commit to anything.
What brands of tile and fixtures do you work with?
We work with a curated set of top-tier brands rather than whatever’s on the shelf that week. For pavers and outdoor tile, our partners include Tremron, Techo-Bloc and Cambridge Pavers, and in bathrooms we lean on established lines for vanities and fixtures that hold up to daily use. We’ll show you the combination that fits your room, your style and your budget, and you choose from real options. Call (833) 630-4214 to talk through materials for your Westchester project.
Do you offer financing on vanity, tile and fixture work?
Yes. Projects qualify for 0% financing for 18 months, and work over $10,000 qualifies for $1,000 off. That applies to tile and fixture packages as well as combined bathroom renovations. We’ll confirm what your project qualifies for during the estimate.
What does the 730-Day Done Right Promise cover?
The 730-Day Done Right Promise covers workmanship on everything we install, for two full years. If a tile pop, a grout failure, a vanity that loosens or a fixture that’s installed incorrectly becomes a problem, we come back and make it right. It’s one of the longest workmanship guarantees in residential construction, and it’s written, not implied. Call (833) 630-4214 if you have a concern under the promise.
Whether you’re replacing a single dripping faucet or retiling a whole bathroom, the next step is a conversation. Groundwork Construction Co. of Westchester answers calls with a live person 24/7, sends background-checked technicians in uniform, and quotes upfront pricing with no surprises. Call (833) 630-4214 for a free estimate and design consult, and we’ll tell you honestly what your tile, vanity and fixtures need – and what they don’t.
Written by the team at Groundwork Construction Co. of Westchester, serving Westchester.


