







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Westchester?
Walk-in shower installation in Westchester runs $4,500 to $12,000 for most homes, with the typical project landing around $7,800. A straightforward acrylic or fiberglass unit with minimal plumbing changes sits near the bottom of that range, while a fully tiled, frameless-glass shower with a new pan, niche, and upgraded fixtures climbs toward the top. The number moves mostly on tile choice, glass style, and whether your existing drain and plumbing can be reused.
We’re Groundwork Construction Co. of Westchester, and we price these jobs every week. Here’s what the work actually costs in this market, what pushes the number up or down, and how to keep a real walk-in shower within budget without cutting the parts that matter.
Key takeaways
- Most Westchester walk-in showers cost $4,500 – $12,000; tiled showers with custom glass sit at the higher end.
- The shower pan and waterproofing are where cheap jobs fail. Florida’s humidity finds every shortcut within a couple of seasons.
- Tub-to-shower conversions are a different line item ($3,500 – $10,000) and sometimes cost less than a from-scratch install.
- We offer upfront pricing, no surprises and a free estimate and design consult, backed by our 730-Day Done Right Promise.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a walk-in shower budget breaks down in Westchester. These are installed prices, materials and labor together, for a standard 36 to 48 square-foot shower footprint.
| Line Item | Price Range | What It Covers |
|---|---|---|
| Shower base / pan | $400 – $1,800 | Prefab acrylic base or a built-in mortar bed with tile |
| Wall material & waterproofing | $600 – $2,200 | Cement board, a bonded waterproofing membrane, and sealant |
| Wall tile & installation | $1,200 – $3,800 | Ceramic, porcelain, or large-format tile set and grouted |
| Shower glass enclosure | $900 – $3,200 | Framed glass up through a frameless 3/8-inch panel with hardware |
| Valve, trim & fixtures | $400 – $1,600 | Pressure-balance or thermostatic valve, showerhead, handheld |
| Drain & rough-in plumbing changes | $300 – $1,400 | New drain location, moving supply lines, liner tie-in |
| Niche, bench, curb & grab bars | $250 – $1,200 | Built-in storage, seat, curbless entry, safety bars |
| Demo & disposal of old shower/tub | $300 – $900 | Tear-out, haul-away, patching surrounding wall |
| Permit & inspection (where required) | $150 – $600 | Plumbing and/or structural permit fees for Westchester |
Add those up and you get the range. A prefab acrylic shower with existing plumbing reused and a framed glass door lands near $4,500. A fully tiled walk-in with a niche, bench, frameless glass, and new valve hits the $10,000 – $12,000 ceiling. The biggest single swing is glass: a framed off-the-shelf kit can cost less than a third of a custom frameless panel, and that’s before tile gets involved.
We factor every one of these lines into the quote up front, so the number you see is the number you pay. No mid-job surprises on tile or hardware.
What Affects Walk-In Shower Installation Pricing in Westchester
Two showers of the same size can differ by thousands. These are the factors that actually move the number in Westchester homes.
- Tile choice and layout. Large-format porcelain (12×24 or bigger) needs a flatter wall and careful setting, so labor runs higher than a mosaic or standard 4×4. Natural stone, marble-look tile, and patterns like herringbone push labor up further. We carry tile from established brands so the material holds up in a humid South Florida bathroom.
- Glass style. A framed sliding door is the budget option. A frameless fixed panel with a hinged door is the upgrade, and on a walk-in shower it’s what most Westchester homeowners want. Frameless glass needs precise measurement and templating, which carries a real labor cost.
- Plumbing condition behind the wall. In older Westchester homes (and there are a lot in and around the Westchester service area), we sometimes find galvanized supply lines, a failing drain, or a valve that can’t be reused. Those get uncovered during demo, and correcting them adds to the job.
- Curbless or low-threshold entry. A curbless walk-in shower requires the floor to be recessed or built up with a sloped pan, plus waterproofing carried out past the shower footprint. That’s more tile, more membrane, more labor. It’s worth it for aging-in-place, but it’s not a same-budget swap for a standard curb.
- Permits and inspection. Moving a drain or changing valve locations usually needs a plumbing permit and an inspection in this part of Florida. We pull the permit and schedule the inspection as part of the job, and the fee shows up as a line item, not buried in the total.
- Niche, bench, grab bars, and other add-ons. Each is small on its own. Three or four together add real dollars. Decide on these before the walls go up, because adding a niche after waterproofing means tearing it open again.
None of this is guesswork for us. Our technicians have up to 12 years of experience, and background-checked technicians arrive on every job in uniform. When we open a wall in a Westchester bathroom, we know what we’re likely to find and price for it before we start.

How Walk-In Shower Pricing Compares to Your Other Options
Sometimes a full walk-in install isn’t the right call, or the budget points toward a different route. Here’s how the numbers stack up against related bathroom work in Westchester.
| Project | Price Range | When It Makes Sense |
|---|---|---|
| Walk-in shower installation | $4,500 – $12,000 | You have space and want a dedicated tiled shower |
| Tub-to-shower conversion | $3,500 – $10,000 | Reusing the existing tub footprint and plumbing |
| Shower replacement | $3,000 – $8,500 | Swapping a failing shower without layout changes |
| Full bathroom remodel | $9,000 – $28,000 | You’re redoing the whole room at once |
| Small bathroom remodel | $5,000 – $12,000 | A compact room where the shower is the anchor |
| Bathroom vanity installation | $800 – $3,000 | Pairing a shower upgrade with a vanity update |
The honest answer on tub-to-shower conversion versus walk-in install: if the existing tub sits where you want the shower, converting is often the cheaper route because the drain and supply lines are already in the right place. A true walk-in install that moves the drain, enlarges the footprint, or replaces a full tub-and-surround is where the higher number comes in. We’ll tell you which one fits your bathroom, not which one fits our schedule.
If you’re planning a bigger bathroom remodeling project and the shower is part of a larger scope, bundle it. Doing the floor, vanity, and shower together saves on demo and permits compared with doing each piece separately.
How to Save on Walk-In Shower Installation
You don’t have to gut the budget to get a walk-in shower you’ll actually like. These moves cut real dollars without cutting the parts that keep the shower waterproof.
- Keep the drain where it is. If the existing drain location works, leaving it in place avoids a plumbing move and the associated permit work. That alone can save several hundred dollars.
- Choose framed glass over frameless. A clean, well-set framed enclosure looks good and costs a fraction of a custom frameless panel. Put the savings toward better tile or a larger shower footprint.
- Pick large-format tile for the walls, standard tile on the floor. Big wall tile covers more area faster, so labor drops. The floor needs smaller tile for grip and slope, so match it with an affordable choice there.
- Decide on niches and benches before demo. Add-ons are cheap during the build and expensive after waterproofing. Plan the whole shower up front.
- Time it with a larger project. If a vanity or floor update is on the list anyway, do them in one visit. Shared demo cuts cost.
We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. A walk-in shower at the higher end of the range can qualify for both. Call (833) 630-4214 for a free estimate and design consult, and we’ll run the numbers on your specific bathroom.
Why the Cheapest Walk-In Shower Bid Usually Costs More
Walk-in showers fail at the waterproofing, not at the tile. A low bid often means shortcuts in the layer you’ll never see: a skipped membrane, a shower pan built without a proper slope, or grout-and-tile set directly on drywall. In Westchester’s heat and humidity, those shortcuts show up fast, as a soft curb, a stained ceiling below, or grout that never stops crumbling.
That’s why we stand behind the work with our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers the two years where a shower that was waterproofed cheaply would show its problems. We don’t need a shorter window because we don’t skip the steps.
We also work from a curated set of trusted brands, so you’re choosing quality, not just what a supplier happened to have in stock. A walk-in shower built to last is the same reason we back window installations and roof work the same way: from foundation to finish line, we build it once and back it in writing.
What’s Included in a Groundwork Walk-In Shower Installation?
Here’s what a full walk-in shower install covers with us, so you can compare bids fairly:
- Free estimate and design consult. We measure your bathroom, discuss tile and glass options, and give you a written price before work starts.
- Demo and haul-away of the old tub or shower and surrounding material.
- Waterproofing done right: cement board plus a bonded membrane, so the wall behind the tile is protected from moisture.
- New shower pan or mortar bed with the correct slope toward the drain.
- Tile, grout, and sealant in the material you choose.
- Valve and fixture installation from a trusted brand.
- Glass enclosure and door, measured and set to fit your opening.
- Permit and inspection where the work requires it.
- Cleanup and a walkthrough so you know exactly how the shower operates before we leave.
Calls are answered by a live person, 24/7. No voicemail black holes, no waiting until Monday morning to get a straight answer about scheduling or pricing. If you’re planning other work around the house, we handle kitchen remodeling, roofing, fence installation, and more, so one call can cover the whole list.
When to Schedule Walk-In Shower Installation in Westchester
You can install a walk-in shower any time of year in Westchester, but the schedule matters for demo and drying. Plan for a few weeks from estimate to completion. The two-day jobs are the ones where everything goes according to plan; older homes with plumbing surprises take longer, and we’ll tell you that before we start.
If you’re working around a single-bathroom home, we can talk through how to keep disruption short. And if the project overlaps with other tub-to-shower conversion or vanity work, we can sequence it so you’re not living around a torn-up bathroom for longer than necessary. For a broader look at everything we handle in your area, see our home improvement and construction services.
FAQs – Walk-In Shower Installation Cost in Westchester
How much does a walk-in shower cost in Westchester?
Most walk-in shower installations in Westchester cost $4,500 to $12,000, with a typical project around $7,800. A prefab unit with reused plumbing sits near the low end; a fully tiled shower with frameless glass, a niche, and a new valve sits near the top. Call (833) 630-4214 for an exact quote, and the estimate is free.
Is it cheaper to convert a tub to a shower or install a new walk-in shower?
Converting a tub to a shower usually costs $3,500 to $10,000, while a true walk-in install runs $4,500 to $12,000. Converting is often cheaper because the drain and supply lines are already in place. If you’re moving plumbing or enlarging the footprint, budget for the full walk-in range. We can tell you which your bathroom fits during a free estimate.
Can you install a walk-in shower in one day?
Most walk-in shower installations take several days, not one, once you account for demo, waterproofing, tile cure, and glass templating. A prefab unit with no plumbing changes moves faster than a fully tiled shower. We give you a realistic timeline before the job starts and keep you updated daily. Call (833) 630-4214 to talk through your schedule.
Does a walk-in shower installation need a permit in Westchester?
Often yes, particularly if you’re moving the drain or valve or changing plumbing. Permit fees typically add $150 to $600 to the project. We handle pulling the permit and scheduling the inspection as part of the job, and the fee appears as a line item in your quote instead of a surprise later.
How much does a tiled walk-in shower cost compared to a prefab unit?
A prefab acrylic shower typically falls in the $4,500 to $7,000 range, while a fully tiled walk-in shower with frameless glass and a custom pan lands in the $8,000 to $12,000 range. The tiled version costs more but gives you a shower built to the shape of your bathroom and a waterproofing layer you control. Call (833) 630-4214 for a free estimate on either option.
Get a Walk-In Shower Price You Can Trust
You came here to find out what a walk-in shower costs in Westchester. The honest answer is $4,500 to $12,000, and the only way to know where your bathroom lands is to have it measured. We offer a free estimate and design consult, upfront pricing with no surprises, and 0% financing for 18 months to make the project workable. Call (833) 630-4214 and a live person answers, any hour. We’ll walk your bathroom, run the numbers, and put it in writing.
Pricing reflects the Westchester market as of 2026. Groundwork Construction Co. of Westchester offers free estimates – call (833) 630-4214.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong












