







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWindow Repair vs. Replacement in Westchester, FL: Choose Replacement Unless Your Frame Already Carries a Current NOA
The honest answer for most Westchester homes built before 2002: choose replacement. Repair only makes sense if your existing window already holds a valid Miami-Dade Notice of Acceptance (NOA) and the damage is limited to glass, weatherstripping, or hardware. Here’s why that distinction matters more here than almost anywhere else. Westchester sits inside the High-Velocity Hurricane Zone, and once a Miami-Dade County permit gets pulled on an older aluminum or jalousie unit, an inspector can require the whole opening to be brought up to current product-approval standards. That’s not a scare tactic – it’s the code sequence. Call us at (833) 630-4214 and we’ll walk you through it before you spend a dime.

Why “Repair vs. Replacement” Is the Wrong Question in Westchester
A $200 hinge swap on a 1978 window sounds like the smarter move until the permit desk asks for product approval paperwork the window never had. Westchester is an unincorporated Miami-Dade community, which means there’s no local city hall to sign off on your job. Every window project runs through Miami-Dade County e-permitting and county inspectors, and those inspectors work from the HVHZ rulebook, not from a contractor’s opinion.
Under HVHZ requirements, any new or replacement window needs a valid NOA on file. Older single-pane jalousie and aluminum slider units – the exact stock installed across Westchester’s 1960s through 1980s concrete-block ranches and Mediterranean-style homes – were never built to that standard and can’t be retrofit into compliance. There’s no grandfathering path once the scope of work triggers an inspection. You can’t repair your way into an NOA.
So the real fork in the road isn’t cheap fix versus expensive installation. It’s compliant versus non-compliant, and the second one can stall a permit, fail a final inspection, or create a disclosure headache the day you sell.
What to Look For Before You Decide to Repair
We tell Westchester homeowners to walk the house with a clipboard before calling anyone. Here’s the check we use:
- Find the NOA label. Every compliant impact window carries a product approval number, usually on the frame or a sticker. No label, no paperwork, no approved repair path.
- Count the panes. Single-pane glass in a pre-2002 home almost always means pre-HVHZ stock. Double-pane with a current label is a different conversation.
- Look at the frame material. Thin extruded aluminum sliders from the 70s and 80s rarely have the anchoring hardware HVHZ demands. Wood and vinyl from later builds sometimes do.
- Check where the leak starts. If water is entering at the frame-to-wall junction rather than the sash, sealing that joint is waterproofing work, not a window repair – and it may pull a permit on its own.
- Ask what the last wind mitigation report said. If your insurance carrier already flagged the openings, that’s a written record of non-compliance.
Two of the three indicators above and you’re looking at replacement, not repair. That’s the pattern we see across Westchester, where heavy summer rain and wind-driven water find every weak flashing detail in aging frames.

Side by Side: What Repair vs. Replacement Actually Delivers
| Repair (if your window is already compliant) | Replacement (HVHZ-compliant install) | |
|---|---|---|
| Typical cost | $150-$600 per unit | $4,500-$15,000 whole-home window replacement; $8,000-$25,000 for impact window installation |
| Code standing after permit | Only holds if the frame already carries a current NOA | Documented NOA compliance on the new product |
| Wind mitigation credit | Unlikely to change | Often improves; ask your carrier |
| Water intrusion risk | Increases with frame age | New flashing, drainage detailing, sealed openings |
| Workmanship coverage | Whatever the handyman offers, usually nothing in writing | 730-Day Done Right Promise on the full installation |
Notice the right-hand column isn’t just more expensive – it’s the only column with a documented compliance trail. That matters when an inspector asks, and it matters more when you sell the house.
How We Handle Replacement So It’s Not a Surprise
We install Andersen and Marvin windows, and both brands carry Miami-Dade NOA approval. That means the paperwork an inspector wants is sitting in the permit packet, not improvised after the fact. Our technicians have up to 12 years of experience setting units in concrete-block walls, which is a different skill from dropping a window into wood framing – the anchoring, the stucco transition, and the flashing detail all change.
Groundwork Construction Co. of Westchester quotes the job upfront. The number you see is the number you pay, and that number typically lands within the ranges above. Every installation is covered by our 730-Day Done Right Promise: if a replaced window leaks or fails inspection inside two years, we make it right at no cost. A repair from an unlicensed handyman carries no such protection, and a failed inspection costs you twice – once for the fix, once for the redo.
For homeowners who discover mid-project that repair was never viable, 0% financing for 18 months lets you move straight to replacement the same day instead of scrambling for cash. You can also take $1,000 off projects over $10,000. Calls are answered by a live person 24/7, so a Friday-night leak doesn’t sit until Monday.
When you’re ready to see the full scope of what we install, start with our Windows & Doors service page, and if you’d like to understand how county permitting shapes every project here, our Westchester service area page covers that ground.
FAQs
Repair on a single unit usually runs $150-$600, while whole-home window replacement in Westchester runs $4,500-$15,000, and impact window installation $8,000-$25,000. The catch is that a repair only holds its value if the existing window already has a current NOA – otherwise the cheaper number can trigger a mandatory full replacement once a permit gets pulled. Call (833) 630-4214 for an exact quote; estimates are free.
No, in most cases you can’t, because those units were never built to HVHZ product-approval standards and can’t be brought into compliance through repair. The jalousie and aluminum sliders originally installed in Westchester’s 1960s-80s concrete-block homes have no NOA path. A Miami-Dade inspection on a modified frame can require full replacement to current code. That’s the conversation we’d rather have with you before you pay someone to patch it.
Yes. Because Westchester is unincorporated, there’s no municipal building department – every window project goes through Miami-Dade County e-permitting and county inspectors working from HVHZ rules. Replacement windows must carry a valid NOA. We handle that paperwork as part of the job, and the products we install already hold the approvals an inspector will ask for.
Repair is cheaper up front – often a few hundred dollars versus thousands – but only if the window is already compliant and the damage is limited to glass, weatherstripping, or hardware. If the frame predates current NOA standards, replacement is the only path that passes inspection, and paying for a repair first usually means paying twice. Call (833) 630-4214 and we’ll tell you which side of that line your windows fall on.
Let’s Look at Your Actual Windows
If you’d rather have it looked at, Groundwork Construction Co. of Westchester offers a no-pressure assessment in Westchester – call (833) 630-4214. We’ll check the labels, check the frames, and give you a straight answer on whether repair is legally available to you.
Written by the team at Groundwork Construction Co. of Westchester, serving Westchester, FL.


