







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterMetal Roofing in Westchester, FL
Metal roofing in Westchester, FL typically runs $9.50 to $16 per square foot installed, and a full residential roof here usually lands between $16,000 and $38,000 depending on the panel system, pitch, and how much of the old roof needs to come off first. Metal is the one roof that makes sense in South Florida’s sun and storm cycle: it reflects heat instead of soaking it, sheds 140-mph wind better than shingle when it’s fastened and sealed correctly, and outlasts asphalt by a wide margin. The catch is that installation quality decides everything, and that’s where we come in.
Groundwork Construction Co. of Westchester handles metal roofing as part of our full Roofing work, with background-checked, uniformed technicians on every job and panels from GAF and CertainTeed where the spec calls for them. Our technicians have up to 12 years of experience, and every metal roof we install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Questions before you commit? Call (833) 630-4214 and a live person picks up, any hour, any day.
Key Takeaways
- Metal roofing in Westchester runs roughly $16,000 to $38,000 installed for most homes, quoted upfront before any work starts.
- Standing seam and exposed-fastener panels both hold up to Miami-Dade wind requirements when installed to spec; the install is what makes or breaks it.
- We answer the phone 24/7 with a real person, offer free estimates, 0% financing for 18 months, and $1,000 off projects over $10,000.
- Every metal roof carries the 730-Day Done Right Promise in writing.

When You Need Metal Roofing
Metal is worth considering in a set of situations we run into all the time around Westchester, and a handful of them are specific to this corner of Miami-Dade. Here’s what should put metal on your short list:
- Your asphalt shingles keep failing early. Shingle roofs in Westchester often show granule loss and curling by year 12 to 15, faster than the national average, because of near-constant UV, heat, and salt air off the coast. If you’ve replaced shingles once already, metal stops the repeat cycle.
- You want to cut cooling costs. A properly installed metal roof with a reflective finish and a ventilated underlayment can knock real money off summer power bills. In 90-degree-plus Westchester afternoons, that reflection matters more here than in most of the country.
- A storm or hurricane left you repairing rather than replacing. If you’ve patched wind-lifted or impact-damaged shingles twice in a few years, the math starts favoring a system that handles the next storm instead of surviving it.
- You’re selling or refinancing and need a roof with remaining life. A metal roof can carry a long service life and a written workmanship guarantee, which holds up better under inspection than a patch job with a short window.
- Your home has a low-slope or complex section where shingle struggles. Some Westchester homes have porch roofs and additions with pitches that shed water poorly under shingle. Metal panels handle those transitions more reliably.
- You’re tired of the noise. A metal roof with solid decking and underlayment underneath is quieter than most people expect in heavy rain, and it doesn’t harbor the algae streaking that turns shingle roofs black in humid climates.
Our Metal Roofing Process
We don’t guess on metal. The panels are only as good as the deck, the fastening, and the flashing beneath them, so the work follows a fixed sequence on every roof we install in Westchester.
- Free estimate and roof assessment. We get on the roof, measure pitch and square footage, check the decking and existing flashing, and talk through standing seam versus exposed-fastener panels. You get a written, upfront price before anything is ordered. No surprises later.
- Material and color selection. We walk you through panel profiles, finishes, and colors, with GAF and CertainTeed options where they fit the spec. You choose on the basis of quality and looks, not just what’s in stock.
- Tear-off and deck repair. Old roofing comes off, and any soft or rotted decking gets replaced. We don’t roof over a bad deck, because that’s where leaks start.
- Underlayment and flashing. High-temperature underlayment goes down, then we detail every valley, penetration, and edge. This is the step that separates a metal roof that lasts from one that leaks at year five.
- Panel installation and fastening. Panels go on to the manufacturer’s spec and local wind requirements, with fasteners set to the correct depth and spacing. Concealed-fastener systems get their clips and seams run clean.
- Final walkthrough and warranty handoff. We walk the roof with you, clean the site, and put the 730-Day Done Right Promise in writing alongside the material warranty.
Need it done sooner because of a leak or storm damage? Call (833) 630-4214. A live person answers around the clock, and we’ll tell you straight whether metal is the right call for your roof right now.

Metal Roofing Pricing in Westchester
Metal roofing in Westchester, FL generally costs $9.50 to $16 per square foot installed, which puts most full residential roofs between $16,000 and $38,000. That range covers the panel, underlayment, fasteners, flashing, and labor. Here’s how the line items break down so you can see where the money goes:
| Line item | Typical range |
|---|---|
| Exposed-fastener metal panels (installed) | $9.50 – $12 per sq ft |
| Standing seam metal (installed) | $13 – $16 per sq ft |
| Tear-off and disposal of old roof | $1,500 – $4,500 |
| Deck repair (if needed) | $400 – $2,500 |
| Underlayment and flashing detail | Included in panel price |
| Total residential project | $16,000 – $38,000 |
What moves you up or down in that range: the panel type (standing seam costs more but hides fasteners and performs better), roof complexity (hips, valleys, and dormers add labor), the condition of your decking, and whether you’re adding ventilation or skylight flashing. A simple gable roof with good decking comes in near the low end. A cut-up roof on a two-story home with rotted decking lands nearer the top.
We quote upfront, so the number you see is the number you pay. And large projects over $10,000 qualify for $1,000 off, plus 0% financing for 18 months to spread the rest out. Estimates are free, and we answer the phone 24 hours a day. For an exact price on your Westchester roof, call (833) 630-4214.
Metal Roofing in Westchester: What Sets a Good Install Apart
The gap between a metal roof that lasts 40-plus years and one that leaks in five usually isn’t the panel. It’s the fastening, the underlayment, and the flashing details. In Westchester, wind-driven rain and intense heat punish shortcuts faster than in cooler climates, so we treat those details as the whole job, not the finishing touches.
Salt air along the coast is another local factor. We steer homeowners toward finishes and fastener grades that resist corrosion, because an untreated fastener is where a coastal metal roof begins to fail. If you’re on the barrier islands or near the water, mention it when you call and we’ll spec accordingly. Our Westchester service area page has more on the neighborhoods we cover and how local conditions shape each job.
We also keep the material list honest. Metal roofing on a residential home means a real panel system, proper underlayment, and the right edge metal, not a cosmetic overlay. When you compare bids, ask exactly what panel, what underlayment, and how the flashing is handled. That’s where the price difference lives.
Repair or Replace? A Straight Answer
If your existing metal roof has a handful of backed-out fasteners or a small flashing leak, a repair can be the right move. If the panels are rusted through, the fasteners are failing across the field, or the roof has already been patched in several spots, replacement usually costs less over five years than repeated repairs. We’ll tell you which situation you’re in, in plain terms, at the free estimate. No pressure, no upselling a job you don’t need.
Why Homeowners in Westchester Call Us for Metal Roofing
- 730-Day Done Right Promise. Every metal roof we install is backed in writing for two full years. If something isn’t right, we come back and fix it.
- Live person, 24/7. Calls are answered by a real human around the clock. No voicemail, no waiting until Monday.
- Upfront pricing. You get the full number before work begins, with no surprise line items at the end.
- Background-checked, uniformed technicians. Verified crews on every job, and our technicians have up to 12 years of experience.
- 0% financing for 18 months and $1,000 off projects over $10,000, so a full metal roof fits the budget without cutting the spec.
FAQs – Metal Roofing in Westchester
How much does metal roofing cost in Westchester, FL?
Metal roofing in Westchester typically costs $9.50 to $16 per square foot installed, or roughly $16,000 to $38,000 for a full residential roof. Standing seam sits at the higher end and exposed-fastener panels at the lower end, with tear-off, deck repair, and roof complexity moving the number. Call (833) 630-4214 for an exact quote, free and upfront.
Is a metal roof worth it in South Florida’s heat?
Yes, in most cases. A metal roof with a reflective finish and proper ventilation cuts heat gain in the attic, which lowers summer cooling costs, and it holds up better to UV and salt air than asphalt shingle over a 40-plus year service life. Financing through our 0% for 18 months option makes the upfront cost easier to manage. Call (833) 630-4214 and we’ll walk you through whether it pays off for your specific home.
Can you install metal roofing over my existing shingles?
We don’t recommend it, and we won’t quote it that way. Layering metal over old shingles traps moisture, hides deck problems, and can cause early fastener failure. We tear off the old roof, inspect the decking, and install to spec so the system lasts. Call (833) 630-4214 and we’ll explain what your specific roof needs.
How long does a metal roof installation take in Westchester?
Most residential metal roof installations take several days to a couple of weeks, depending on square footage, roof complexity, weather, and how much deck repair is needed. We’ll give you a realistic timeline at the estimate, not an optimistic one. Call (833) 630-4214 to schedule and get a start date.
How does metal compare to shingle for weathering hurricanes?
Metal panels, properly fastened and sealed to local wind requirements, generally handle high wind better than asphalt shingle, which is prone to lifting and granule loss. The install is the deciding factor: correct fastening and flashing separate a storm-ready roof from a vulnerable one. Call (833) 630-4214 to talk through the fastening spec for your home.
Get a Free Metal Roofing Estimate in Westchester
If your roof is showing its age, or you’re ready to move up to a system that handles South Florida heat and storms for decades, we’ll come out, measure, and put a real number in front of you. Free estimate, upfront pricing, and the 730-Day Done Right Promise in writing when we’re done. Call (833) 630-4214 and a live person will pick up, day or night.
Written by the team at Groundwork Construction Co. of Westchester, serving Westchester.


