







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Westchester, FL: What It Costs and How Long It Takes
A chain link fence in Westchester, FL typically runs $3,500 to $9,000, with most residential perimeter jobs landing between $4,200 and $6,800 for a standard 4-foot galvanized run on a quarter-acre lot. Installation takes one to three days once the county permit clears, and the fence itself can last 20 years or more if the posts are set in concrete below the frost-free depth. Call (833) 630-4214 and we’ll walk your property line with you and put a real number in writing before any work starts.
How We Build a Chain Link Fence, Step by Step

Most contractors treat chain link like it’s a one-day commodity job. It isn’t, and the difference between a fence that stands straight for two decades and one that sags after two Miami-Dade rainy seasons comes down to soil, post depth, and concrete. Here’s the actual sequence we work through in Westchester, along with the decisions you’ll make at each stage.
Stage 1: Site walk and line layout (1 – 2 hours)
Before anything gets dug, we walk the property line with you and confirm the exact footprint – where the fence starts, where it turns, where the gate sits, and what it’s actually protecting. In Westchester’s tighter infill lots, this often means setting the line back from the survey pins by a foot or two so you don’t end up in a boundary dispute with a neighbor after the concrete sets. You’ll also decide post spacing here, typically 8 to 10 feet on center for standard residential chain link and tighter for high-wind cohesion.
Stage 2: Utility locate and permit filing (2 – 5 business days)
Florida law requires underground utility locates before any digging, so we file those first. Because Westchester sits in unincorporated Miami-Dade, the fence permit goes through Miami-Dade County’s e-permitting system rather than a municipal building department, and depending on the height and wind-rating of what you’re installing, that submittal can take anywhere from two to five business days to clear. You’ll need to sign off on the fence height and any HOA-required details before we submit.
Stage 3: Post holes, concrete, and line posts (a full day)
We auger post holes 18 to 24 inches deep and 8 to 10 inches wide, set the line posts in concrete, and let them cure before the tension work begins. Miami-Dade’s limestone and coral rock subsoil – the same stuff that makes you sweat on a shovel in this part of the county – often means we’re switching to a rock-bar or hydraulic auger halfway through the run. Curing overnight isn’t optional; skipping it is exactly why fences lean after the first wet season.
Stage 4: Terminals, top rail, and mesh tensioning (day 2)
Corner posts, gate posts, and end posts go in with deeper footings and higher-grade concrete because they carry the tensile load of the entire run. Then we hang the top rail, unroll and stretch the mesh, and tension it with a come-along until the fabric is taut and clean. You’ll decide at this stage whether you want the mesh woven into the rail or tied with wire, and whether the gate is a standard self-closing spring unit or a heavier frame.
Stage 5: Gate hang, walkthrough, and clean-up (half a day)
The gate goes on last because it’s the piece that tolerates the least slop. We set the hinges, adjust the sag out of the swing, install the latch, and then walk the whole line with you. Old fencing and concrete spoils go into a trailer and off the property. Most residential jobs finish this stage on day two or day three; larger runs or rocky lots push to a fourth day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link isn’t a single product – it’s a family of systems and the choices you make here are what separate a $3,500 job from a $9,000 one. Here’s what we walk through with homeowners in Westchester before ordering material.
- Fabric height and gauge. A 4-foot tall 11.5-gauge chain link is the standard residential spec and holds up well. Going to 6 feet, or to a heavier 9-gauge fabric, costs roughly 20 – 30% more but resists climbing pressure and cuts visibility surprisingly well. If you’re fencing along a busy cut-through street, the heavier gauge is worth it.
- Galvanized vs. vinyl-coated. Plain galvanized steel is the most economical and lasts 15 – 20 years in South Florida before weathering shows. Vinyl-coated (either black, green, or brown) costs 15 – 25% more but blends into landscaping far better and resists the salt-heavy air that comes with living 20 minutes from the coast. For a homeowner wanting a fence that disappears visually, the coated option is usually the pick.
- Post grade. Standard 16-gauge line posts versus Schedule 40 pipe for terminals and gate frames. The heavy posts are where it matters – gates on standard posts sag within a few years in this wind and humidity.
- Top rail and tension wire vs. tension bar. A top rail with a tension bar at each end is the stronger, cleaner install. A bare tension wire bottom is cheaper but catches debris and looks unfinished after a few seasons.
- Gate type. Standard walk gate, double-drive gate, or a self-closing spring gate for pets and kids. Add roughly $400 – $1,200 depending on width and hardware.
- Privacy slats or windscreen inserts. Optional, adds $3 – $6 per linear foot, and in Westchester they’re a frequent ask because so many lots back up to each other with little landscaping buffer. The trade-off is wind load – a solid windscreen turns a porous fence into a sail, so we spec the post spacing tighter when they go in.
What Chain Link Fence Costs in Westchester, FL

For a standard residential installation in Westchester, the all-in number runs $3,500 to $9,000, with the median around $5,500 for a 150- to 200-linear-foot perimeter at 4 feet tall in galvanized steel. Here’s how that breaks down and what pushes the job to one end or the other.
| Line Item | Typical Range |
|---|---|
| 4-foot galvanized chain link, 100 – 150 linear feet | $3,500 – $5,500 |
| 4-foot vinyl-coated, same length | $4,200 – $6,500 |
| 6-foot heavy-gauge, 200+ linear feet | $6,500 – $9,000 |
| Standard walk gate (36 – 48 inch) | $400 – $800 |
| Double-drive gate | $900 – $1,600 |
| Privacy slats or windscreen | $3 – $6 per linear foot |
| Rock or coral removal (mid-job) | $300 – $1,200 |
| County fence permit | $150 – $400 |
Four variables move that number the most: total linear footage (the single biggest driver), fence height and gauge, how much of the line runs over rock or existing concrete, and whether gates or privacy inserts are in play. An older property with a fence already in the ground adds demolition and haul-away, usually $200 – $600.
Every written estimate we put in front of you is line-itemed: footage, post count, gauge, gate hardware, concrete, permit, and demo all listed separately so you can see exactly what you’re paying for. What typically isn’t included, and will be flagged if it applies: landscape repair after we pull out old posts, moving sprinkler lines we didn’t know were there, or any HOA submittal fee your association charges. Upfront pricing means the number you see is the number you pay – no change orders halfway through for “surprise” rock.
See the difference
Before
After
Before
After
Before
AfterWhat Westchester Homes Specifically Do to This Job
Westchester’s status as an unincorporated pocket of Miami-Dade shapes this job in ways a fence contractor from a neighboring city won’t anticipate. There’s no Westchester city hall to walk a permit through – everything runs through Miami-Dade County’s e-permitting portal and its inspectors, and any fence over 6 feet or tied to a property-line survey change often requires product approval documentation on file before the county signs off. We know that system cold, because it’s the same one that governs every addition and rebuild in this community.
The housing stock matters too. Westchester runs heavily to 1960s through 1980s concrete-block ranch and Spanish-style homes on infill lots, and by 2026 many of those lots are either being expanded or having the original fence replaced for the first time in 30+ years. We regularly see old chain link that’s rusted at the bottom rail while the posts themselves are still solid – a sign the fence was set correctly but the original gauge wasn’t up to South Florida’s salt air. And because we’re in the High-Velocity Hurricane Zone, we spec post spacing and concrete depth on the heavier side of what the county allows, so a wind event doesn’t turn a fence into a pile of bent pipe. If you’re also planning a larger project – say, prepping a detached structure in the backyard – homeowners often pair this with ADU Site Prep & Utilities in Westchester so both jobs share the same utility locates.
For the wider picture of how fencing fits into the property, take a look at our Fence Installation in Westchester page, and if you’re replacing entry doors or a gate that ties into the fence line, Door Installation in Westchester runs through the same county permitting channel. We cover this community and the surrounding neighborhoods as part of our broader Westchester service area, and every fence job builds on the same Fence Installation standards we use across Miami-Dade.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Westchester

Most residential chain link fences in Westchester take one to three days of build time, plus two to five business days for the Miami-Dade County e-permit to clear first. The curing overnight for line posts is what separates a two-day job from a rushed one, and we don’t skip it.
Yes – because Westchester is unincorporated Miami-Dade, any fence permit goes through the county, not a municipal building department. We file the submittal, handle the product approval documentation, and schedule the inspection. Call (833) 630-4214 and we’ll tell you exactly what your property line needs.
Residential chain link in Westchester runs $3,500 to $9,000 all-in, with a typical 150-foot perimeter at 4 feet tall landing around $5,500. Height, gauge, gates, and any rock removal on the property line are the biggest swing factors.
Yes, and it’s common in Westchester’s older neighborhoods. We pull the old posts and fabric, reset the line to the survey pins, and re-pour footings so the new fence sits true. Demo and haul-away typically adds $200 – $600 to the job.
Every fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years from the walkthrough. Our technicians have up to 12 years of experience, and every crew is background-checked and arrives in uniform. Call (833) 630-4214 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in Westchester
Chain link quotes should be one page, line-itemed, and honest about every variable before any work starts. When you call for your free on-site estimate, we’ll measure your exact property line, walk through gauge and coating choices, and hand you a written number the same visit – backed by our 730-Day Done Right Promise, upfront pricing, and 0% financing for 18 months. Call (833) 630-4214 and we’ll get someone out to your Westchester property this week.
Written by the team at Groundwork Construction Co.












