







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Westchester, FL: What the Job Actually Involves
Door installation in Westchester, FL usually runs $650 to $2,400 per door installed, depending on whether you’re hanging an interior slab, setting a pre-hung exterior entry, or adding a hurricane-rated impact unit, and most single-door jobs wrap in one day. Exterior doors that need framing repair, threshold work, or a new opening take two to three days once Miami-Dade County review is in hand. Call (833) 630-4214 and we’ll walk the openings with you and put real numbers on paper before anything gets ordered.
How We Run a Door Installation, Start to Finish

Every door job here follows the same five stages. What changes is the door, not the sequence.
Stage 1: Walk-through and measure (day 1, about an hour)
We check every opening for plumb, square, and level, and we look at what’s behind the trim – concrete block, furring strips, or old lath. You decide which openings get done now and whether you’re matching existing door styles or starting fresh. This is also where we flag any rot or settling that changes the scope before you commit.
Stage 2: Ordering and permit filing (days 2 to 10, mostly waiting)
Exterior doors in unincorporated Miami-Dade need product approval documentation, and impact units need that NOA paperwork in the package before they can be signed off. We file through the county’s e-permitting system and order the units. Interior door swaps usually skip permitting entirely. You’ll sign the written, line-item estimate during this window, and the price on that sheet is the price you pay.
Stage 3: Demo and prep (job day, first 2 to 4 hours)
Old door and trim come out, the rough opening gets cleaned up, and any damaged framing or sill gets repaired. On older Westchester homes this is where we sometimes find a header that needs sistering or a threshold that was never flashed correctly. We fix it before the new unit goes in, not after.
Stage 4: Setting and sealing (same day, next 2 to 4 hours)
The door goes in, gets shimmed, plumbed, and fastened, then we seal the perimeter, set the threshold, and hang the hardware. Exterior units get flashing and a bead of sealant rated for Florida sun and driving rain. You decide on hardware finish and handleset at this point if you haven’t already.
Stage 5: Trim, inspection, and walkthrough (final 2 to 3 hours)
Casing and trim go on, we check the swing and the latch, and the county inspector signs off on permitted exterior work. We finish with a walkthrough of every door with you, and your workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Choices You’ll Be Picking Between
Materials and configuration drive most of the price difference. Here’s the honest version of each path.
- Interior hollow-core slab: The value pick for closets and bedroom swaps. Light, cheap to replace, and fine for rooms without heavy traffic. Won’t survive a slammed door for a decade.
- Interior solid-core: Quieter, heavier feel, holds up to daily use. The right call for bathrooms and primary bedrooms where sound matters.
- Exterior fiberglass entry: Handles Westchester’s sun and humidity without warping or needing paint every few years. The most common pick for front doors here.
- Exterior steel: Strong and secure, but in this climate it needs a careful paint schedule or it rusts at the edges. Best for garages and utility doors.
- Impact-rated entry doors: The standard for exterior openings in the county’s hurricane zone. Heavier, pricier, and required to carry product approval – this is where the paperwork lives.
- Sliding and French configurations: Great for patios and light, but they need more framing and more sealing detail. Bigger opening, bigger line item.
Finishes matter too: satin nickel and matte black hardware are the current default, and prefinished doors save you a painting step on exterior units. We’ll show you samples on site so you’re choosing from what’s actually in your hand.
What Door Installation Costs in Westchester, FL

Most single-door installations land between $650 and $2,400. Here’s how that range breaks down by type:
- Interior door replacement (slab or pre-hung): $650 – $1,200 per door
- Exterior entry door, fiberglass or steel: $900 – $1,800 per door
- Impact-rated exterior entry: $1,400 – $2,400 per door
- Framing, header, or sill repair: $250 – $700 add-on per opening
- New opening cut into a wall: $800 – $1,600 add-on, plus finishing
The variables that push you toward the high end: whether the opening needs structural repair, whether the door is impact-rated and requires county permit review, whether you’re matching existing trim profiles, and how many doors you’re doing at once. A five-door interior swap costs less per door than a single exterior unit because the setup work is shared.
Every estimate we write is line-item against the scope we measured, so there are no hidden surprises. The number you see is the number you pay. If you’d like to finance it, we offer 0% financing for 18 months, and projects over $10,000 get $1,000 off. The estimate itself is free, and quotes are written – never verbal ballpark figures.
See the difference
Before
After
Before
After
Before
AfterWhat Westchester Homes Specifically Do to This Job
Two things make door work here different from most of the country. First, the permitting reality: because Westchester is an unincorporated Miami-Dade community, there’s no city hall to walk into. Every exterior door, and anything that touches an opening in a wall, runs through Miami-Dade County e-permitting and county inspectors, which means turnaround on approval is measured in days, not a single visit to a counter. Second, the hurricane zone requires impact-rated units with product approval documentation on exterior openings, so a “simple door swap” on a front entry is really a code-compliance task, not just a carpentry one. Get that wrong and the inspector fails the job.
Housing stock shapes the work too. Most of the single-family homes we work on in Westchester date from the 1960s through the 1980s – concrete-block walls with stucco exteriors and flat or low-slope roofs – and door openings in those homes tend to be square-ish but not quite plumbing-straight, which means more shimming and more trim adjustment than a new build. We also see plenty of infill and expansion work around Olympia Heights and Sunset where newer two-story homes have doors that are hung tight from the factory and need less fuss. Weather is the constant. Heavy summer rain and wind-driven water work every threshold, so we detail flashing and seal the perimeter like a small roofing job.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Westchester

A single interior door takes 2 to 4 hours, and most interior door jobs are finished in one day. An exterior entry door typically runs 4 to 8 hours on the day of install, with 7 to 10 days of lead time before that for ordering and permit review on impact-rated units. Call (833) 630-4214 and we can give you a realistic date range for your specific openings.
Exterior door installations and any new openings cut into a wall require a permit through Miami-Dade County because Westchester is unincorporated and has no city building department. Interior door swaps between existing jambs usually don’t. We handle the e-permitting and pull the documentation so you’re not chasing approvals – call (833) 630-4214 to confirm your specific project.
Most door installations in Westchester need zero plumbing or structural work – the opening already exists and we’re replacing what’s in it. Structural repair enters the picture only when a header is compromised or a wall has settled enough to affect plumb. We’ll tell you on the walkthrough if that’s the case, and the repair is written into the estimate up front rather than added later.
Interior door installations start around $650 per door at the low end, and an impact-rated exterior entry on a permitted opening tops out near $2,400. Most of the jobs we quote fall in the middle of that range. Custom sizes, structural repair, and multi-door orders that need matching trim push it higher – call (833) 630-4214 for an exact quote, and estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise: if the install isn’t right, we make it right, for two years. Manufactured door defects are covered separately by the door’s own manufacturer warranty, which we’ll walk through with you on the final handoff. It’s the longest workmanship guarantee we offer across our trades, and doors included.
Get a Free Door Installation Estimate in Westchester
Planning a door installation in Westchester and want a real number before you commit? Call (833) 630-4214 and a live person answers – any hour, any day. We’ll schedule a free on-site estimate, measure every opening, and hand you a written line-item quote with the door, the labor, and any permitting spelled out separately. If you’re also updating the rest of the openings, our Windows & Doors service covers that full scope, and you can see the Westchester-specific page at Windows & Doors in Westchester. Jumping into a bigger renovation? Homeowners often pair this with Cabinets & Countertops in Westchester or a Garage Conversion ADU in Westchester – and if you’d like to know more about the areas we cover, see our Westchester service area page. Call today.
Written by the team at Groundwork Construction Co..












