







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Olympia Heights, FL: What It Costs and How Long It Takes
Asphalt driveway paving in Olympia Heights runs $3,500 to $9,000 for a typical residential drive, and resurfacing an existing one usually lands between $1,200 and $3,500 depending on square footage and how far the base has failed. Most drives are finished in two to three working days, then need roughly 48 hours of foot traffic only before you park on them. Call (833) 630-4214 and we’ll price yours on-site, free.
How we resurface and pave an asphalt drive, start to finish

Asphalt isn’t a one-day pour-and-leave job, and the base matters more than the blacktop you see. Here’s the actual sequence we run on Olympia Heights driveways, with what you’ll be deciding at each stage.
Day 1, morning: tear-out and base inspection
We strip the old surface where it’s failed and expose the aggregate base underneath. This is where we find out what we’re really working with – the 1950s – 70s slab-on-grade lots common here often hide soft spots, old root intrusions, or a base that was never compacted correctly. You decide at this point whether we patch and resurface over the sound sections or go for full replacement. That’s a real fork in the budget, and we’ll show you the failing areas before you commit.
Day 1, afternoon: grading and compaction
We re-grade so water sheds away from the house and garage, then compact the base in lifts. Poor drainage is the number one reason asphalt fails early in South Florida, and Biscayne Bay humidity plus heavy summer rain makes a bad slope expensive fast. Expect three to four hours here. If we’re adding a new drive rather than resurfacing, this stage runs into a second day.
Day 2: binder course and finish course
Hot-mix asphalt goes down in two lifts – a thicker binder course and a finer surface course – rolled and compacted while it’s still hot. We schedule this early in the day because the mix has to be laid within a temperature window. This is your material-grade decision: standard mix versus a polymer-modified surface that holds up better under standing water and sun. We’ll walk you through the price difference before we order.
Day 3: edges, transitions, and cleanup
We cut clean edges against the grass, apron, and garage slab, backfill the shoulders, and sweep the site. If you want a paved apron or a border treatment at the street, that gets set on this day. Anything tied to a wider scope gets coordinated here – many homeowners run this as part of a full Driveway & Pavers in Olympia Heights project rather than a standalone job.
Days 3 through 30: cure and seal window
You can walk on the drive after about 48 hours and park on it after roughly 72. Full cure takes up to 30 days, and we ask you to keep heavy vehicles and sharp-pointed loads off it during that stretch. Sealing is optional and typically scheduled at the 6-to-12-month mark, once the asphalt has fully cured and released its oils.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for an asphalt drive
- Standard vs. polymer-modified mix. Standard hot-mix is the lower-cost route and handles normal residential use well. Polymer-modified costs more per ton but resists rutting and moisture damage better in our wet summers. If your drive has any low spots that hold water, it’s worth the upgrade.
- Resurface over existing vs. full replacement. Resurfacing is cheaper and faster but only works when the base is still sound and the failures are surface-level. If the base is gone, resurfacing is money thrown away – we’ll tell you which one you’re looking at.
- Base thickness. A standard residential base versus a thicker compacted base for driveways with heavy trucks or RV parking. Thicker base adds cost but prevents the rutting you’d otherwise see within a few years.
- Edge treatment. Clean asphalt edge against the grass, a concrete curb, or a paver border. Border treatments cost more but hold the edge together where the drive meets the lawn.
- Sealer grade. Standard emulsified sealer versus a heavier aggregate-filled sealer that fills small cracks. We’ll quote both so you can see the difference.
Where a driveway transitions to hardscape, we use Belgard and Tremron products often, and our Driveway & Pavers service covers the paver side of the same job.
What Asphalt Driveways & Resurfacing costs in Olympia Heights, FL

Sticker prices here, not a range you have to interpret: new asphalt paving at $3,500 – $9,000, full driveway replacement at $5,000 – $14,000, and resurfacing at roughly $1,200 – $3,500. Sealing alone runs $250 – $700 when done as a standalone service. Our written estimates are line-item, and the number you see is the number you pay.
Four things move that number:
- Square footage. The single biggest driver. A single-car drive and a double-car drive are different jobs entirely.
- Base condition. Soft or failed base means excavation and re-compaction, which adds labor and material. Resurfacing over sound base skips all of it.
- Grading and drainage work. A drive that needs re-sloping to shed water away from the garage costs more than one that already drains correctly.
- Access. Narrow lots and tight carport clearances here mean smaller equipment and more hand work, which is slower.
- Edge and apron details. Curbs, paver borders, and street aprons add cost per linear foot.
Your estimate covers base prep, compaction, both asphalt courses, edge work, and cleanup. Sealing later is priced separately, and any underground utility relocation would be quoted before we start – never as a surprise mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights homes specifically do to this job
Olympia Heights is unincorporated Miami-Dade, which means permits go through the county Building Department, not a city office – and inspectors here are strict about Florida Product Approval numbers on every material that touches the structure. For a driveway, the practical difference is drainage and right-of-way: anything that alters how stormwater moves off your lot toward the street can trigger county review, so we check the swale and the apron before we touch the surface. The housing stock matters too. Most homes here are 1950s – 1970s concrete-block on small lots, many expanded piecemeal over the years, so driveways frequently get boxed in by later additions, carports, and non-conforming setbacks. We see the same failure pattern repeatedly: cracked and settled asphalt where a root or an old utility trench runs under the slab, and ponding in the low corner nearest the garage after summer storms. If your project also adds a structure, homeowners often pair this with ADU Site Prep & Utilities in Olympia Heights, and if you’re fencing the property line at the same time, Chain Link Fence in Olympia Heights is a common add. We cover the full Olympia Heights area, ZIP 33165.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Olympia Heights

Most residential drives are finished in two to three working days, with about 48 hours of foot traffic only and 72 hours before you park on it. New construction drives take longer than resurfacing because the base has to be built from scratch. Call (833) 630-4214 for a schedule that matches your drive.
Resurfacing an existing drive within its current footprint usually doesn’t require a permit, but any change to the driveway’s size, its apron at the street, or how it drains toward the swale can trigger Miami-Dade County review. We check this before we quote, so you know exactly what’s required. Call (833) 630-4214 and we’ll walk you through it.
Yes, if the base is still sound – resurfacing over a solid base is faster and less expensive than a full replacement. If the base has failed or there’s significant settling, a resurface will crack again within a season or two and we’ll tell you that rather than sell you the cheaper option. Call (833) 630-4214 for an honest assessment.
Resurfacing typically runs $1,200 to $3,500 for a residential drive, while a new asphalt driveway is $3,500 to $9,000 and a full replacement is $5,000 to $14,000. Size, base condition, grading, and edge details are the variables that move it. Call (833) 630-4214 for an exact line-item quote – estimates are free.
Every asphalt job we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (833) 630-4214 to get your project on the schedule.
Get a free asphalt driveway estimate in Olympia Heights
Call (833) 630-4214 for a free on-site estimate on asphalt driveways & resurfacing in Olympia Heights. A live person answers around the clock, every day of the week – no voicemail. We’ll measure the drive, check the base and drainage, and hand you a written line-item quote with fixed pricing. Estimates are free, there’s no pressure, and 0% financing for 18 months is available if you need it.
Written by the team at Groundwork Construction Co.












