







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Glenvar Heights, FL: What the Job Actually Involves
A paver driveway in Glenvar Heights typically runs $7,000 – $18,000 and takes three to five working days from demolition to the final sweep of joint sand. You’re getting a base, a bedding layer, and a surface of interlocking concrete pavers set in the pattern you pick. Call (833) 630-4214 for a free on-site estimate with a written line-item quote. Live person, 24/7.
How We Build a Paver Driveway, Stage by Stage

Every driveway in this ZIP follows the same basic sequence, and the number of days depends mostly on how much old surface has to come out and how tight the access is.
Stage 1 – Site walk and layout (day of estimate)
We measure the drive, check the slope away from the house and garage, and look at what’s underneath. On Glenvar Heights lots with mature trees, we also locate root zones that will affect excavation depth. You decide the paver style and the border during this visit, not later.
Stage 2 – Demolition and haul-off (day 1)
Existing concrete, asphalt, or worn pavers come out and go into a dumpster sized for the job. A typical two-car drive is one day. If the old slab is reinforced, we cut and lift it in sections. You’ll see the subgrade at the end of this day, which is the first real look at what the rest of the job is working with.
Stage 3 – Base prep and grading (day 2)
We excavate to depth, then lay and compact a crushed stone base in lifts. On the flat terrain here, getting positive drainage away from the garage door is the whole game – a base that’s out of level by an inch can send water into the door threshold. This is where the schedule either holds or slips, because a wet base can’t be compacted.
Stage 4 – Setting and cutting pavers (day 3 into day 4)
Bedding sand goes down, pavers go in, and edge restraints get set in concrete along both sides. Anywhere the drive meets the garage, a walkway, or the street apron, we cut pavers to fit with a wet saw. You’ll see the pattern emerge here and this is your last easy chance to flag a border detail you want changed.
Stage 5 – Polymeric sand, compaction, and cleanup (day 4 or 5)
We sweep sand into the joints, activate it, and run a plate compactor over the surface one final time. Then we clean the street edge and walk the job with you. That walkthrough is also where you get the paperwork for the workmanship coverage.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on a paver driveway happen before we pull a single paver off the pallet. Here’s what actually matters:
- Paver style and color. A tumbled, mottled paver hides tire marks and tree-litter stains far better than a smooth, solid-color one. Solid colors cost less per square foot but show every leaf stain during the summer wet season.
- Thickness. Standard 60mm pavers handle foot traffic and light vehicles. If you park a heavy truck or an RV on the drive, move up to 80mm – it holds up to point loads better and adds a modest amount to the material line.
- Border and pattern. A soldier-course border costs a little more in cutting but keeps the edge from looking ragged as the driveway settles. Herringbone wears better in high-turn areas; running bond is easier and cheaper.
- Base depth. A drive carrying only passenger cars can be built on a thinner base than one that sees a trailer or a loaded work truck. This single decision often separates a low-end job from a mid-range one.
- Permeable vs. conventional. Permeable pavers let rain pass through to the base, which matters on flat lots during our afternoon downpours, but they cost more and need regular vacuuming to keep the voids open.
On the material side, we install Unilock and Tremron regularly, and both hold up well in South Florida sun. The honest trade-off with premium lines is price and lead time, not durability. Don’t fall for the idea that a cheaper paver cracks faster – a cheap base cracks everything.
What Paver Driveways Cost in Glenvar Heights, FL

Expect $7,000 – $18,000 for a full paver driveway here, and the number you see on our written quote is the number you pay. Five things move that range:
- Square footage. A single-car drive lands near the bottom, a wide two-car or a drive with a turnaround pushes toward the top.
- Existing surface. Concrete slab removal runs more than pulling up old pavers – cutting and hauling reinforced concrete is slower work.
- Site access. Narrow Glenvar Heights side streets and low tree canopies mean a dumpster or a pallet drop may have to go somewhere less convenient, and that costs time.
- Paver grade. A standard 60mm tumbled paver versus an 80mm premium line is a real spread per square foot.
- Drainage corrections. If the drive needs regrading to protect the garage slab, add labor and material.
Your written estimate lists pavers, base stone, edge restraints, polymeric sand, demolition, haul-off, and compaction line by line. It typically does not include tree root pruning beyond the excavation area, or any utility relocation if a line shows up under the old slab. We flag both before we start, never mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Glenvar Heights Homes Specifically Do to This Job
This is a built-out, post-war neighborhood in ZIP 33143 where almost every project is a rebuild on an existing lot – not new construction. That shapes a driveway job in ways you only learn by working here. The housing stock is mostly 1950s – 1970s single-story ranch and concrete-block homes, and many of those lots still have original driveways under the 60-year-old slab lineage. When we pull a slab on a lot near the mature live oak canopy, we’re often cutting through roots and confirming that the old drive was graded toward the garage, not away from it. Fixing that grade is a genuine part of the scope, not an upsell.
The other local reality is the wet season. From May through October, a thunderstorm can roll in by 3 p.m. and soak a freshly excavated base. On a high-water-table, flat lot, that means staging excavation so the base goes down and gets compacted before the next front. If the schedule needs to shift a day for the weather, we shift it and tell you. On narrow streets off the main corridors, deliveries have to be timed around parking and school traffic, so we plan the pallet drop for early morning.
If your driveway job is part of a larger Driveway & Pavers in Glenvar Heights project – a patio or walkway – we phase the work so heavy equipment isn’t running over new pavers. Homeowners often pair this with Door Installation in Glenvar Heights when the garage door has been fighting a settling slab, which is common on these older homes. If you’re redoing a whole first-floor kitchen or bath at the same time, see our Cabinets & Countertops in Glenvar Heights and our broader Driveway & Pavers service. We cover the whole Glenvar Heights area.
Serving Glenvar Heights, FL – Our Local Coverage Area
We serve Glenvar Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Glenvar Heights

Three to five working days for a typical two-car drive, with demolition on day one and final compaction on the last day. Wet-season weather can add a day if the base needs to dry before compaction. Call (833) 630-4214 to schedule an on-site estimate and we’ll give you a firm schedule.
It depends on whether the work changes the driveway footprint or affects the right-of-way, and the local building department sets those rules. We pull what’s required for your specific job and hand you the inspection records when the work is done. Call (833) 630-4214 and we’ll confirm the permit scope before you commit to anything.
Yes, most paver driveways are a surface and base rebuild that doesn’t touch plumbing or the house structure. If a utility line turns up under the old slab, we stop, document it, and price the fix separately. Call (833) 630-4214 for an estimate that spells out what’s included.
Most jobs land between $7,000 and $18,000, driven by square footage, paver grade, and how much old surface comes out. Upfront pricing means the quote doesn’t drift. Call (833) 630-4214 for a free written estimate.
Every paver driveway we install carries the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (833) 630-4214 or ask about it at your estimate.
Get a Free Paver Driveway Estimate in Glenvar Heights
Call (833) 630-4214 to book a free on-site estimate for Paver Driveways in Glenvar Heights. A live person answers, day or night. We’ll measure the drive, walk the grade with you, and leave you with a written line-item quote and a clear schedule – no pressure, and no change orders once the work starts.
Written by the team at Groundwork Construction Co.












