







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Coral Gables, FL: What to Expect
New cabinets and countertops in Coral Gables typically run $14,000 to $45,000 for a full tear-out and replacement, and most jobs take three to five weeks from demo to final caulk. The number swings hard on one question: are the boxes going back in the same footprint, or are we moving walls, plumbing, and outlets to get the layout you actually want? Call (833) 630-4214 for a free on-site estimate and we’ll put real numbers on paper after we’ve seen your kitchen.
How We Take a Gables Kitchen From Old Boxes to New Stone

Cabinet and countertop work looks simple on a calendar and rarely is. Here’s the actual sequence we run, and where you make the calls.
Stage 1: Measure, template, and lock the order (days 1-3)
We measure the room down to the sixteenth, check whether the walls are plumb (in 1920s stucco-and-coral-rock homes they usually aren’t), and confirm appliance sizes before anything gets ordered. You decide door style, finish, and box configuration here. Cabinets are built to order, so this is the stage that sets your whole timeline: expect 3 to 6 weeks of lead time on semi-custom boxes before we can install.
Stage 2: Demo and prep (days 1-2 of the on-site build)
Old cabinets come out, and we open the wall to see what’s behind them. In older Coral Gables homes this is where surprises show up: cast-iron drain lines, knob-and-tube remnants, or a soffit that turns out to be structural. We photograph everything and walk you through any change before we proceed. Subfloor and wall repair gets done now, not later.
Stage 3: Cabinet install (days 2-4)
Bases go in first, shimmed and scribed to the wall, then uppers. Crown and light rail go on last. You confirm hardware placement and any pull-out or lazy-susan configuration before the doors go back on. This is also when the countertop template happens: stone fabricators measure from the installed boxes, not from a drawing.
Stage 4: Countertop fabrication and set (days 5-10)
Quartz or granite gets cut at the fabricator, which usually takes 5 to 7 business days. We set the slab, cut the sink and cooktop openings, and seam it where it’ll be least visible. Undermount sinks get mounted here, so if you’re changing the sink, decide before this stage.
Stage 5: Finish and punch (days 10-14)
Backsplash, toe kick, caulk lines, outlet covers, and a full walkthrough with you. Anything on the punch list gets fixed before we call the job done. Everything is covered by our 730-Day Done Right Promise: if it’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions that drive your price happen in two categories: the boxes and the slab. Here’s the honest trade-off on each.
- Stock vs. semi-custom cabinets: Stock boxes are cheaper and faster but come in fixed sizes, which means filler strips and lost inches in an older Gables kitchen with uneven walls. Semi-custom (KraftMaid is what we spec most) lets you adjust depth and height to fit the room, and it’s worth the extra cost when the walls aren’t square.
- Plywood vs. particleboard boxes: Plywood holds up better to South Florida humidity and screw-holding, and it’s the difference between cabinets that survive 20 years and cabinets that swell at the sink base. It costs more. We recommend it in kitchens with any moisture exposure.
- Quartz vs. granite vs. quartzite: Quartz is non-porous, needs no sealing, and comes in consistent patterns; it’s the default for most Coral Gables kitchens. Granite is natural and unique but needs periodic sealing. Quartzite is the hardest and most heat-resistant, and it’s the most expensive slab of the three.
- Slab thickness and edge profile: 2cm slabs with a built-up edge cost less than 3cm solid slabs. Eased and square edges are standard; bevels and ogees add fabrication time.
- Sink and cooktop cutouts: Farmhouse sinks, undermounts, and any cooktop that needs a cutout all add fabrication cost and lead time. Deciding these early saves a re-template.
Choose your boxes and slab before you fall in love with a hardware finish. Hardware is the cheapest thing to change and the last thing to order.
What Cabinets & Countertops Costs in Coral Gables, FL

Full cabinet and countertop replacement in Coral Gables runs $14,000 to $45,000. Cabinet installation alone is $4,000 to $13,000; countertop installation is $2,000 to $6,500; an island adds $3,000 to $10,000; and a backsplash runs $800 to $2,500. Here’s the line-item picture:
| Scope | Typical range |
|---|---|
| Cabinet installation (semi-custom, standard layout) | $4,000 – $13,000 |
| Countertop installation (quartz or granite) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full cabinet & countertop replacement | $14,000 – $45,000 |
What pushes a job to the high end? Five things, mostly: the size of the run (a 40-foot kitchen costs exponentially more than a 15-foot galley); whether we’re moving plumbing, gas, or electrical to relocate the sink or range; material grade (a stock box with laminate counters vs. a semi-custom KraftMaid box with a Cambria quartz slab); whether walls, subfloor, or a soffit need repair behind the cabinets; and permit scope. A like-for-like swap in the same footprint is a different job than a layout change with new electrical.
Every written estimate itemizes cabinets, counters, installation labor, and permit fees separately. What’s not in the base number unless we flag it: appliance changes, plumbing or gas relocation beyond a simple swap, and structural repair found after demo. We tell you that before we open a wall, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables Homes Specifically Do to This Job
Coral Gables is one of the strictest design-review cities in the country. The Board of Architects has to approve exterior changes, and a large share of the core sits inside locally designated historic districts, so cabinet and countertop work that touches a window, door, or exterior wall can trigger review you didn’t plan for. Interior-only work usually moves faster, but if your kitchen has a window or door change in the scope, the board timeline gets added to your calendar. That’s a real cost of doing business in this city, and it’s why we ask about window and door plans up front.
The housing stock shapes the work too. The 1920s Mediterranean Revival homes from George Merrick’s original plan, plus mid-century ranches and newer infill, mean we regularly work with coral rock walls, thick stucco, and unplumb cabinets where nothing is square. South Florida humidity is the other factor: cabinet boxes swell, caulk fails at the counter-to-wall seam, and a sink base without proper sealing will show it within a few seasons. We spec plywood boxes and seal the joints specifically because of the climate here. If your kitchen renovation is part of a larger project, that’s covered on our Kitchen Remodeling in Coral Gables page, and our Kitchen Remodeling service hub has the wider scope.
We cover the whole city, from the blocks around the Biltmore to the streets off Miracle Mile, and you can see the full Coral Gables service area for details. Homeowners here often pair a kitchen refresh with a Garage Conversion ADU in Coral Gables when they need more space, or a New Detached ADU in Coral Gables for a family member or rental income.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Coral Gables

Three to five weeks from demo to punch list, with most of that time waiting on cabinet lead time rather than on-site work. The on-site build itself is usually 7 to 10 working days. If you’re adding design review for a window or door, add several weeks for the board. Call (833) 630-4214 for a free estimate and a real timeline.
Straight replacement in the same footprint usually doesn’t need one. Permits become necessary when you’re moving plumbing, gas, or electrical, or when the scope touches walls, windows, or doors. We pull permits and pass inspections where they’re required, and we’ll tell you up front whether your job needs one.
Yes, and that’s the cheaper route. Keeping the sink and range in place avoids plumbing and gas relocation, keeps the job in the low-to-mid range, and cuts permit scope. A layout change with a moved sink is a different job with a bigger number.
Between $14,000 and $45,000 for a full tear-out and replacement, depending on run length, material grade, and whether walls or utilities need work. Call (833) 630-4214 for an exact quote – estimates are free and we itemize every line.
Workmanship on the installation is covered by our 730-Day Done Right Promise: if it’s not right, we make it right. Cabinet and countertop manufacturers also carry their own product warranties, and we walk you through both at the final inspection.
Get a Free Estimate for Cabinets & Countertops in Coral Gables
Call (833) 630-4214 and a live person answers, any hour. We’ll schedule a free on-site estimate, measure the room, and hand you a written line-item quote that separates cabinets, counters, labor, and permits. No change orders mid-job, no surprises. Our technicians have up to 12 years of experience, and every job is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












