







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Glenvar Heights, FL: What the Job Really Involves
New cabinets and countertops in Glenvar Heights, FL usually run $14,000 – $45,000 when you’re replacing both, and most projects take two to five weeks from demolition to the last caulk line. The work is cabinets first, then templating, then counters: you can’t cut stone until the boxes are set, leveled, and screwed to the wall. Call (833) 630-4214 and we’ll schedule a free on-site estimate, measurements included.
How the Cabinet and Countertop Job Actually Runs, Stage by Stage

This is a sequenced job, not a weekend swap. Here’s the real order, with what you decide and when.
Stage 1: Measure, layout, and order (days 1 – 10)
We measure the actual walls, not the drawing. In Glenvar Heights’ 1950s to 1970s concrete-block ranches, walls are rarely square and floors rarely level, so we note every out-of-plumb corner and plan filler strips and shims before anything is ordered. You lock the cabinet line, door style, and finish here. Cabinet lead times run three to six weeks on most semi-custom lines, so this stage sets the whole calendar.
Stage 2: Demo and prep (1 – 2 days)
Old cabinets and counters come out, and we check what’s behind them: water shutoffs, outlet placement, and whether the wall is block or furred drywall. If a previous owner tiled directly over drywall, the backsplash substrate gets replaced, not patched. This is also when we confirm the new cabinet depth clears any window trim, which comes up often on these shallow post-war kitchens.
Stage 3: Cabinet install (2 – 3 days)
Base cabinets go in first, leveled and screwed to studs and to each other. Uppers follow on cleats at the height you chose. Doors and drawers get adjusted at the end of this stage, not before. You confirm hardware placement on day one of install, because after the holes are drilled, that decision is made.
Stage 4: Template and countertop fabrication (5 – 10 days)
Stone and quartz can’t be templated until the cabinets are final and set. A templating crew comes out, cuts a physical or digital template, and the slab is cut and polished at the fabricator. Undermount sink openings and faucet holes are set from that template, so the sink needs to be on site before templating, not after.
Stage 5: Countertop set, sink, and final walkthrough (1 – 2 days)
The tops go down on a bead of adhesive, seams are aligned, and the sink and faucet get connected. We run water, check for leaks under the cabinet, and do a final walkthrough with you. Every project carries our 730-Day Done Right Promise: if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Cabinet box construction: Plywood boxes hold screws and resist moisture far better than particleboard, which swells if a supply line drips. Plywood costs more; in a humid South Florida kitchen, it’s usually the right call.
- Door style and material: Painted MDF doors give a clean, flat look and cost less; solid wood and wood-veneer doors handle humidity better and can be refinished later. Thermofoil is the budget option, and it peels at the edges over time in heat.
- Stock vs. semi-custom: Stock sizes fit fast but leave gaps you fill with panels. Semi-custom lets you hit the ceiling and work around an off-square wall, which matters in these older homes.
- Countertop material: Quartz is non-porous and needs no sealing; granite is porous and needs resealing roughly once a year but takes heat better. Laminate is the low-cost choice and shows wear at the seams. Brand partners like Cambria are worth seeing in person before you decide.
- Edge profile and thickness: A standard eased edge in 2cm or 3cm slab is the base price. Bullnose, beveled, and waterfall edges add fabrication time and money.
- Sink and cooktop cutouts: Each opening is cut from the template. A farmhouse sink changes the cabinet front and adds cost; a standard undermount doesn’t.
What Cabinets & Countertops Cost in Glenvar Heights, FL

Expect $14,000 – $45,000 for cabinets and countertops together in Glenvar Heights, FL. Line items break down like this:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Four things push a job toward the top of that range. Kitchen size and cabinet count come first: a galley layout costs far less than an L-shape with an island. Next is whether plumbing or electrical has to move, since relocating a sink or adding a circuit behind a block wall means opening the wall. Material grade is third: painted MDF and laminate sit at the low end, semi-custom plywood and quartz at the high end. Last is existing condition, meaning whether the old backsplash has to be demoed to bare wall and whether the floor is level enough to set cabinets on.
A written estimate lists cabinets, countertop fabrication and install, demolition, haul-away, and any electrical or plumbing work we’re coordinating. It doesn’t include appliance purchases, structural wall changes, or flooring replacement, which get quoted separately. Upfront pricing means the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available.
See the difference
Before
After
Before
After
Before
AfterWhat Glenvar Heights Homes Specifically Do to This Job
Glenvar Heights (ZIP 33143) is a built-out post-war suburb just outside Miami’s urban core, and nearly every kitchen here is a remodel on an existing lot rather than new construction. That shapes the work directly. Many of these 1950s to 1970s concrete-block ranches have been incrementally expanded over the decades, so you’ll find an interior wall that doesn’t line up with the original plan, a soffit hiding old wiring, or a carport that was enclosed and left with a low ceiling over the kitchen. When a wall is concrete block, moving a sink or adding an outlet means cutting block and patching, not opening drywall, and that adds time.
The mature live oak and ficus canopy affects deliveries and site access along the narrow residential streets, and the wet season from May through October means we schedule cabinet deliveries and slab drop-offs around afternoon storms. The City of South Miami’s tree protection rules can slow site work if a protected tree sits near the work area, so we flag that early. Homes that need more room often pair this job with a Garage Conversion ADU in Glenvar Heights or a New Detached ADU in Glenvar Heights, and if the project grows past the kitchen, that’s part of a full Kitchen Remodeling in Glenvar Heights. We cover all of Glenvar Heights and the surrounding streets, and our Kitchen Remodeling team coordinates the trades if you’re doing more than cabinets and counters.
Serving Glenvar Heights, FL – Our Local Coverage Area
We serve Glenvar Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Glenvar Heights

Most jobs run two to five weeks, with the biggest variable being cabinet lead time. The install itself is about five to seven working days once materials are on site; the wait before that is ordering and fabrication. Call (833) 630-4214 for an exact timeline on your kitchen.
Straight cabinet and countertop swaps usually don’t need one, but moving plumbing, electrical, or a wall does. We pull the permits that apply and handle the inspections, and we’ll tell you upfront which parts of your job require them.
Yes, in most cases. Keeping the sink and range where they are avoids opening walls, which keeps cost and downtime down. If you want a sink relocated under a window, that’s a plumbing change and gets quoted as a separate line.
It runs $14,000 – $45,000 for cabinets and counters together, depending on size, materials, and whether plumbing moves. Call (833) 630-4214 for an exact quote, and the estimate is free.
Every project is covered by our 730-Day Done Right Promise, and manufacturer warranties on cabinets and slab come on top of that. If something isn’t right, we come back and fix it.
Get a Free Cabinets & Countertops Estimate in Glenvar Heights
Call (833) 630-4214 to schedule a free on-site estimate for cabinets and countertops in Glenvar Heights. A live person answers, 24/7, and we’ll measure your kitchen, walk through material options, and hand you a written line-item quote with no change orders. Estimates are free, and we’ll tell you straight what your kitchen needs.
Written by the team at Groundwork Construction Co.












