







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Miami, FL: What It Takes, How Long, and What It Costs
Door installation in Miami runs $1,200 to $4,800 for a typical exterior or interior door, with most single-door swaps finishing in one day and multi-door packages spanning two to four days. The work covers removal, frame prep, shimming, hardware set, weatherseal, and finish touch-up. Call (833) 630-4214 to schedule a free on-site estimate and get a written line-item quote before anything is ordered.
The failure pattern we see first in Miami homes
Salt air doesn’t wait. Along the coastal end of the county, garage springs, hinge screws, rollers, track brackets and opener chains corrode two to three times faster than they do inland, and the first sign is usually a stiff hinge or a roller that shrieks in the dry season. Once a fastener loses its zinc coating, moisture works into the wood or block behind it and the door stops closing square. We build every Miami door install with galvanized or coated hardware, stainless fasteners where salt spray reaches, and nylon rollers instead of steel. If you’re folding a door replacement into a wider project, it often sits alongside Windows & Doors in Miami work on the same wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How Door Installation works, stage by stage
Stage 1: On-site measure and inspection (day 1, about an hour). We check the existing frame for rot, out-of-square reveals, and hidden water damage behind the trim. On CBS block exterior walls, we note whether the opening is a standard rough frame or a field-built one. You decide the door swing direction and hinge side at this visit.
Stage 2: Quote and product selection (2 – 5 days). You get a written line-item quote separating door, hardware, finish, and labor. This is when you pick the door type, material, and finish color. Custom orders on fiberglass or solid wood doors add lead time; stock sizes can usually be scheduled within a week.
Stage 3: Demo and frame prep (day of install, 2 – 4 hours). Old door and trim come out. We inspect the rough opening, repair any soft wood or spalled block, and set the sill so it sheds water outward. This is where Miami jobs either run smoothly or reveal a problem. On older masonry homes, we sometimes find the frame nailed to furring strips with no proper anchor.
Stage 4: Set, shim, and seal (3 – 4 hours). The door goes in square and plumb, shimmed at hinges and strike. We foam and caulk the perimeter, install weatherstripping, and set the threshold. Hardware goes on last. You test the swing and latch with us before we close the day.
Stage 5: Hardware, finish, and walkthrough (1 – 2 hours). Final adjustments, touch-up paint or stain, and a full walkthrough to confirm the door swings freely, latches clean, and seals tight. We pull all packaging and leave the opening weathertight.
Most single-door jobs finish in a single day. Multiple doors on the same floor usually run two to four days depending on exterior wall repairs. Rear or garage-facing doors that touch a converted space often pair naturally with a Garage Conversion ADU in Miami, and the same staging logic applies.
The options you’ll choose between
- Fiberglass exterior doors: the most common Miami pick. They resist moisture, don’t warp in humidity, and can be finished to look like wood. Cost is roughly mid-range; durability is strong.
- Solid wood doors: beautiful, but they swell and shrink in Miami humidity and need more upkeep. Best for interior spaces with controlled air.
- Steel doors: secure and affordable for back and side entries, but they rust at fasteners and edges near the salt air. Choose galvanized and inspect yearly.
- Hollow-core interior doors: the cheapest route for bedroom and closet swaps. Lightweight, but they don’t block sound or wear as well as solid core.
- Solid-core interior doors: better feel, quieter rooms, modest price bump. Worth it for bathrooms and hallways.
- Patio and French door sets: more complex framing and a bigger rough opening. Expect longer install and more sealant detail against wind-driven rain.
- Hardware and finish upgrades: stainless or coated hinges, kick plates, and quality deadbolts. These cost more upfront but hold up against salt spray far longer than standard zinc.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation costs in Miami, FL
For a single standard door, Miami pricing lands between $1,200 and $2,800 installed, with the door itself often accounting for 40 to 60 percent. Multi-door packages, exterior impact-rated units, and repairs to the rough opening push the upper end to $4,800 and beyond. Four variables move the number most:
- Door material and grade: fiberglass, solid wood, and steel land at very different price points.
- Existing condition: soft wood, cracked block, or a frame that’s out of square adds repair labor.
- Opening size: non-standard rough openings need custom sizing or a new frame.
- Hurricane-rated product: a Miami-Dade NOA-approved door costs more than a standard unit but meets code.
- Permit scope: exterior door changes and any structural alteration trigger permitting, which adds inspection scheduling.
A written estimate covers door, hardware, fasteners, weatherseal, labor, cleanup, and the 730-Day Done Right Promise on workmanship. It typically does not include structural repairs to a damaged wall or painting outside the door area. The number you see is the number you pay.
What Miami homes specifically do to this job

Miami is built to a code that doesn’t exist anywhere else in Florida. In the High Velocity Hurricane Zone, Miami-Dade County enforces the strictest wind-borne debris and product-approval rules in the U.S., so any exterior door opening change requires a Miami-Dade Notice of Acceptance on the door unit and a permit inspection before sign-off. That’s a different schedule than the same job in Tampa, and storm season (June through November) can push scheduling out.
In older neighborhoods like Little Havana and Edgewater, we routinely find original 1920s CBS block walls with no continuous reinforcement or tie-downs at the opening. That triggers wind-mitigation retrofits and can change how the door is anchored. Homes in ZIP codes 33128 and 33130 are dense with 1920s Mediterranean Revival and Mission-style masonry, which means arched openings and terrazzo thresholds that need care during demo. We cover Miami and adjacent areas including Brownsville, Gladeview, Miami Springs, and Coral Gables; the Miami service page lays out the full coverage for our Windows & Doors work.
Serving Miami, FL – Our Local Coverage Area
We serve Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Miami
Most single door installs finish in one day. Multi-door packages run two to four days. Custom orders or exterior openings that need wind-mitigation retrofit can stretch the calendar a week or more. Call (833) 630-4214 for a scheduling estimate.
Exterior door replacements and any change to the opening size generally require a Miami-Dade permit and inspection. Interior door swaps inside an existing frame usually don’t. We confirm your job’s scope and pull the permit where required; the inspection passes before we consider the job closed.
Yes, in most cases a same-size replacement fits without structural changes. The door goes back into the existing rough opening with new fasteners and weathersealing. If you want to widen a doorway or add a new opening, that’s a structural alteration with its own permit.
A single door runs $1,200 to $2,800, and multi-door packages or hurricane-rated exterior units push to $4,800 and up. The number is driven by material, existing frame condition, opening size, and permit scope. Call (833) 630-4214 for a free written estimate.
Workmanship is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties cover the door and hardware on their own terms. We walk you through both at the final inspection.
Get a free Door Installation estimate in Miami

We’ll visit your Miami home, measure the opening, check the frame and hardware, and hand you a written line-item quote before any work begins. Calls are answered by a live person 24/7 at (833) 630-4214. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. If you’re refreshing an adjacent space, homeowners often pair door work with Cabinets & Countertops in Miami.
Written by the team at Groundwork Construction Co.












