







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Gladeview, FL: What It Costs and How Long It Takes
A chain link fence in Gladeview, FL typically costs between $3,500 and $9,000, and most residential yards are finished in two to four days once the permit is in hand. The job includes post setting, frame assembly, fabric tensioning, and gate hanging, and the price swings mostly on linear footage, height, and gate count. Call (833) 630-4214 for a free on-site estimate before you commit to a layout.
How our chain link fence process runs, stage by stage

Chain link looks simple from the street. The parts that decide whether it lasts fifteen years or five happen below grade, in the first day of work. Here’s the sequence we follow on a Gladeview yard, and what you decide at each step.
Day 1: Layout and utility mark-out
We walk the property line with you and stake the corners, gates, and terminal posts. Before anyone digs, the 811 call goes in so buried irrigation, cable, and gas lines are flagged. You confirm the gate swing direction and the exact setback from the property line here, because moving a corner after posts are set costs real money. This takes half a day on most lots.
Day 1-2: Post holes and concrete setting
Terminal, corner, and gate posts get larger holes and more concrete than line posts, because those carry the tension. Holes go 30 to 36 inches deep and get poured with a fast-setting mix. Posts need roughly 24 hours to cure before the fabric goes up, so this is the natural pause in the schedule. In Gladeview’s sandy, high-water-table soil, a post set shallow will lean within a season, and no amount of tightening fixes it later.
Day 2-3: Frame, top rail, and tension bands
Top rail runs through rail-end cups and sleeves, and tension bands go on every terminal post. We set the fabric on the ground, stretch it with a come-along, and tie it off with tension bars. Sag comes from under-tensioning, not from cheap wire, so this is the stage where a careful crew shows its hand.
Day 3-4: Gates and hardware
Gate frames get braced corners, hinges, a latch, and a drop rod on double gates. You choose the hinge style and whether you want a self-closing spring. Walk gates get checked for swing and clearance against the concrete or pavers.
Final walkthrough and cleanup
We tension-check the whole run, cut off tie tails, and haul the old fencing away. You get a written record of the post depth and spacing, which matters if you ever file a permit or a storm claim. The whole job stays covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a chain link fence
Chain link is one product family with a lot of variation inside it. These are the decisions that change both the look and the number.
- Gauge and coating. Eleven-gauge wire is the residential standard and holds up well. Nine-gauge costs more but resists impact and bending. Galvanized lasts, and vinyl-coated (green or black) blends into landscaping better and adds both cost and years.
- Height. Four-foot is common for a boundary line, five-foot for pets and kids, and six-foot where you want more privacy or security. Each jump in height adds fabric, post, and concrete.
- Post and rail weight. Heavier wall-thickness pipe and a full top rail make a stiffer fence. Some builders skip the top rail to save money; we don’t, because a fence without a top rail loses its shape fast.
- Privacy inserts. Slats or mesh inserts give you sight-line blocking while keeping the chain link frame. A quick mention only, since privacy screening has its own dedicated coverage.
- Gates. A single walk gate is standard. Double drive gates need bracing and heavier hardware, and that’s where gate cost climbs.
- Brands. We source through established manufacturers and, on the hardscape side of a yard project, work with Belgard and Tremron where a homeowner wants the fencing to line up with new pavers.
What a chain link fence costs in Gladeview, FL

Residential chain link in Gladeview runs $3,500 to $9,000 for a typical yard. Here’s roughly how the total breaks down before you add gates or privacy inserts.
| Line item | Typical range |
|---|---|
| Chain link fence, full residential run | $3,500 – $9,000 |
| Single walk gate | Priced within the range above |
| Double drive gate | Adds to the upper end of the range |
| Vinyl-coated or heavier gauge upgrade | Pushes toward the high end |
Four things push a job to the low or high end. Linear footage is the biggest lever. Height and gauge come next. Gate count and drive-gate hardware add cost quickly. And site conditions matter: a rocky or heavily rooted run, or one that crosses existing concrete, takes more labor. Old fence removal and haul-away is a separate line. Every written estimate is line-itemed with no change orders, and the number you see is the number you pay. Call (833) 630-4214 for an exact figure on your property.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview homes specifically do to this job
Gladeview is unincorporated Miami-Dade County, ZIP 33147, so fence permits run through the county rather than a city building department. That matters for chain link because a fence on or near a property line, or one that encloses a pool, has to meet setback and safety requirements that a county inspector will check. The housing stock here is mostly mid-century concrete-block (CBS) single-family homes and small duplexes, and a lot of these yards have old chain link that’s been patched and re-tensioned for years. The failures we see are consistent: shallow-set posts leaning after heavy rain, rusted bottom rail along the ground line, and gates that sag because the original braced corners gave out. Chain link doesn’t carry the wind-load engineering that HVHZ permitting demands of roofs and windows here, but a storm still exposes a weak installation fast, and a fence that goes down in a squall is a fence that was set wrong. If you’re already planning yard work, homeowners often pair a new fence with ADU Site Prep & Utilities in Gladeview so trenching and grading happen once. A new gate and hardware sometimes comes up alongside Door Installation in Gladeview where a homeowner is refreshing the whole entry sequence. This is a narrow piece of a bigger picture, and you can see the full scope on our Fence Installation in Gladeview page. For homeowners across Gladeview, we handle chain link as part of that Fence Installation service, with background-checked, uniformed technicians on every job.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Gladeview

Most residential chain link fences take two to four working days, with a cure pause after posts are poured. Permit turnaround through Miami-Dade County adds time before work starts. Call (833) 630-4214 to get a schedule for your yard.
Often yes, especially for fences near a property line or enclosing a pool, since Gladeview is unincorporated Miami-Dade County and county permitting applies. We pull the permit and see the inspection through. Call (833) 630-4214 and we’ll tell you what your specific lot needs.
Plan on $3,500 to $9,000 for a typical residential run. Height, gauge, gates, and site conditions move the number. Call (833) 630-4214 for a free estimate with line-item pricing.
No. Our written estimate is fixed with no change orders, so what you sign is what you pay. If we find an unexpected condition like buried concrete, we talk to you before touching it. Call (833) 630-4214 to schedule.
Every project carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Call (833) 630-4214 with questions before you book.
Get a free chain link fence estimate in Gladeview
Call (833) 630-4214 to schedule your free on-site estimate for a chain link fence in Gladeview. We answer live, day or night, and we walk the property with you, measure the run, and hand you a written line-item quote. Our technicians bring up to 12 years of experience to the job. No pressure, no surprises, just a firm number you can plan around.
Written by the team at Groundwork Construction Co.












